Toyota caldina specifications

The GA14 engine was used in a number of Nissan vehicles, including the Sentra and Pulsar. It is a 1.4 liter inline-four engine that was produced from 1985 to 2002.
As for the gearbox, it is likely that the GA14 engine was paired with a manual or automatic transmission, depending on the specific model and year of the vehicle. It is possible that the GA16 engine, which is a 1.6 liter inline-four engine, could also be paired with a manual or automatic transmission, depending on the vehicle in which it is used.
It is important to note that the specific gearbox that fits a particular engine will depend on the specific model and year of the vehicle, as well as the engine size and other factors. In order to determine the correct gearbox for a GA14 or GA16 engine, it would be necessary to consult the vehicle's manufacturer or a reputable mechanic.

all transmission block the starter motor dead
via, PRNDL switch if not in P or N, starter is blocked
AW80-40LE automatic???????
on stick shift car the clutch switch(foot) does same.
no year car
no country or engine size told
1999 to 2005 made.
engine list world wide, wow
Powertrain Engine

• Petrol:
• 1.0 L 1SZ-FE I4
• 1.3 L 8A-FE I4 (China)
• 1.3 L 2SZ-FE I4
• 1.3 L 2NZ-FE I4
• 1.5 L 1NZ-FE I4
• 1.5 L 1NZ-FE Turbo I4-T
• Diesel:
• 1.4 L 1ND-TV I4-T

Transmissions

• 5-speed manual
• 4-speed AW80-40LE automatic
• CVT (Japan, 1.3 L FWD only; 2002-2004) (no) easy no.

You need a Service Manual not an Owner's Manual. It appears to be a foreign named Corolla. You need a Haynes or Chiltern Manual if you want a real book.

https://www.google.com/search?q=1994+Toyota+Caldina+service+manual

..

how lucky do you feel? You will be the first one to try it. If the bell housing fittings are the same, and the transmission out is the same, you might be lucky. However, it the old one has 5 gear meshes, and the new one has 6, it has to be bigger. Better to have the old one rebuilt, or buy a 5 speed.

https://www.google.com/search?q=2001+daf+fa+150%2C+5+speed+to+6+speed+gearbox

..

Help in the link

https://www.google.com/search?q=1995+GMC+Sonoma+SLE%2C+extended+cab%2C+2+wheel+drive.+Replacing+the+5+speed+manual+transmission

..

split? is engine in car or out:?

this manual i found gives you for example t-5 then you look on manual for t-5 and it shows u where to do repair http://www.apexi.co.jp/pdf/products/rsm_wiring_e.pdf

Toyota 2c ...
USE NEW BOLTS...
Torque sequence:
You're driving a diesel single cylinder head engine. Engine head torque has to be done in specific order and stages if not can warp head or break bolts. Suggest you get torque sequence and torque specs from your Toyota dealer, they can give you correct answer. Don't trust answers on here, if you choose wrong specs. could end up messing up head.


Flywheel - Use a Sealer on bolt, Manual Transmission 88nm/65 ft lb... Auto Transmission 74nm/55 ft lb

no year.
no car stated.
you kidding right?
is it a carb car or EFI ?????
tell more get more..... for sure...

DATA:
7K (wiki)
The 1.8 L (1,781 cc) 7K was first introduced in 1983. Cylinder bore was 80.5 mm (3.17 in) and stroke was 87.5 mm (3.44 in). Output was 80 hp (60 kW) at 4600 RPM and 103 lb·ft (139 N·m) at 2800 Was available with a 5 speed manual & 4 speed automatic transmission. Available in both fuel injected and carburetted configurations, the 7K produces much more power and torque compared to the other K engines however it is a lot less 'rev happy' due to having such a large stroke.
7K is available in KR42 Townace SBV vans (1997-2007) using a large G52 5 speed gearbox (Same bellhousing to box pattern as W55), or automatic.
Applications:

• Toyota Kijang/Toyota Revo/Toyota TownAce

is this an engine swap question.
start there. say object clearly.