What size are the two bolts o 1999 Chevrolet Alumina thermostat?
SOURCE: where is the thermostat located on a1999 lumina v6?
Hi! **** here! V6 Chev's can't be much different to Small blocks can they? Follow your Top Hose from the Radiator to engine block, where it connects does a bubble, half domed aluminum casing appear? with possibly two securing nuts/bolts? If so YahOO! youv'e just found the illusive little blighter! Good Luck! Paul 'W' Onyer~EDson(:0) {#><U.K. Please rate my effort!
SOURCE: allen wrench size to fit caliper mounting bolt
some are 7/16 and some are 3/8 amd some are torx
SOURCE: bolt size for 96 chevy front caliper
2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to loosen all 4?
SOURCE: best way to replace thermostat on a 1999 chevy
HI" the best to get to it with out a struggle is to remove the cross over pipe make sure engine is nice and cold apply plenty of wd -40 to 4 bolts holding cross over pipe in place ,this will save you lots of frustration ,you can go the other route 13 flex pref 1/4 and plenty of patience when put in it back together ,hope this helps
Testimonial: "very helpfull"
178 views
Usually answered in minutes!
×