I have a 1998 528 needs valve cover gasket has had engine changed need to know how do I find out what year the engine is at 08/98 valve cover gasket is diffrerent
Here's a link showing both valve cover gaskets for the 98 year. Valve Cover Gasket 1998 BMW 528I 6 Cylinders 2 8L EFI DOHC AutoZone com
SOURCE: Leaks oil looks like from valve cover
You have to remove the spark plugs cables and remove the four nuts that you see when the cables are removed.
When the four nuts are removed, simply raise the valuve cover. When replacing the gasket, make sure you get the gromets as well. Those sometimes get worn or crack since they are more exposed than the value cover gasket. Make sure that you clean the cover from oil and replace the gasket with no use of silicon.
Good Luck.
SOURCE: valve cover gasket replace on a subaru svx
ALL DATA time to R&R valve cover gaskets both sides is 2.1 hours. you will need to remove brackets and connectors on either side, It will also help to take the upper plenium bolts out but not completly pull the plenium. If you don't have a lot of mechanical experiance and some basic tools. you may want to consider to have a local a shop to perform this service for you after you get a estimate. RON.
SOURCE: how to remove the valve cover to replace gasket
What kind of engine? If it's a 3.0L Vulcan, you have to take off the upper and lower intake manifolds and you'll be able to take the valve covers off. There's a bunch to take off before you get to that point. The EGR Valve, Throttle body assembly, ignition coil pack, etc. Make sure you relieve the fuel system pressure (it might be behind the right side well cover of your trunk- disconnect that connection), and take off the negative battery terminal before begining work.
SOURCE: Head Gasket?? Valve cover Gasket???
most likely it is the valve cover gasket. it covers the valve train where there is alot of oil to lube the top of the motor. if the head gasket was leaking it may have more signs of running poorly. also having coolant leaks also. so i will have to say valve cover gasket. now usally you may have a oil burning smell with it depending on the area of the lek but not always.
the valve cover can easily be seen when the hood is open. it is right on the top and where it meets the clyinder head is where the gasket is and the leak can be seen.
if you have more question please ask.
Testimonial: "Information was extremely helpful and descriptive!! ThanX."
283 views
Usually answered in minutes!
×