I own a 2003 silhouette van and it is misfire on cylinder 1 after rocking the van back and forth toget unstuck from the snow i replaced the plugs wires and coil pack going to cylinder one the engine light is still on and flashing and the engine sounds light it doesn't have oil but it does any suggestions

SOURCE: MISFIRING ON CYLINDER 1 VW POLO 1.4 3CYLINDER

I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.

SOURCE: codes are reading cylinder misfire and replaced

does the check engine light come on b 4 or after

SOURCE: 99 olds silhouette.. trouble code says ....

could be injector on cylinder

Colin Stickland

• 22516 Answers
• Posted on Dec 12, 2010

SOURCE: 1997 Jetta GLX VR6 giving

pull the multi plug connectors off the coil pack and check the connections ,and then rub the pins with a soft lead pencil and see what happens

SOURCE: 2001 VW Beetle 2.0L Gas - - Car has been acting

Sounds like the coil is getting wet!!!!!!!