Both handles broke . son tried to fix them but locked himslef out of the car . whats some ways i can get in to fix without the obvios solutions like tow or break window. any other ideas? thanks for any help
SOURCE: my car
Do you have full glass coverage on your insurance? If so, they will pay to have it installed by any installer of your choice. There usually isn't a deductible for it.
If not, call around. Make sure they know that you already have the window and you only need it installed. They'll give you a quote. Go with the cheapest place.
SOURCE: only key locked in car
call a tow truck.... they carry kits in their vehicles to unlock the car
Robert
Please take a moment to rate this solution.. thanks
SOURCE: went to the airport to pick up son .. on the way
check your battery cables and make sure they are tight. have your battery and charging system tested.
SOURCE: 1998 Chrysler Sebring Car Stereo Radio Wiring
i have a 1997 chrysler sebring LX Coupe and i can't figure this out i got a aftermarket jvc cd player and i got the wiring harness for my car chrysler and i am not getting any sound please help me
SOURCE: need to remove my 1998
Hi Thank you for contacting fixya.com
First consult the owner's manual for directions on how to turn the car alarm on and off.
Put the key in the ignition and try to start the car. On many systems this will shut off the alarm.
Find the alarm's fuse. It may be in the fuse box, usually located below the steering wheel to the left. Many cars also have other fuse boxes (sometimes three or even more) inside the engine compartment. If it's an aftermarket alarm (installed after the car left the factory), you'll find the fuse under the hood, usually on a wire connected to the positive battery terminal. Locate the fuse that has the alarm label. You should find a fuse diagram on the lid of the fuse box. An aftermarket alarm won't have any label. Don't worry; removing the wrong fuse won't cause any damage. If you pull out a fuse and the alarm stays on, put that fuse back in and try another. Pull the alarm fuse with the fuse puller (sometimes found in the fuse box) or a pair of needle-nose pliers. Sometimes you can remove a fuse using your fingers.
However as a last resort, disconnecting the battery's negative terminal will stop the alarm, but it will also keep your car from starting.
Please get back to us if you have further query else please accept the suggestion.
30 views
Usually answered in minutes!
ok got in but alarm is going crazy and my son is out with the key LOL ... grrrr!!!
i no longer need any help .. found the solution . thanks anyway
×