1998 Plymouth Breeze Logo
Wendy Way Posted on May 24, 2009

Broken Belt under the 1998 Plymouth Breeze 2.4L DOHC 4 Cyl. engine.

When I started my car this morning to go to work, the engine made a constant very heavy, extremely rough sound. I immediately shut off the engine and looked under the hood and saw nothing. I looked under the car and found a broken belt that has 4 ribs and has Mopar 4PK897 04663182AB 043546A on it. It is approximately 24 inches around. Please advise.

  • Wendy Way May 25, 2009

    Hi! Thank you for your answer but I am not a car expert by any stretch of the imagination. I would have no idea where to look for a tensioner or idle pulley, although I would love to be able to fix something like this myself! I am in the medical field and cars are just not within my expertise! I'm very sure that I will just have to wait until after the Memorial Day weekend to get this fixed! I will be asking around about the tensioner and the idle pulley and thank you for your very kind input!!

  • Anonymous Mar 30, 2014

    Heard loud popping sound while driving. Car cut off and would not restart. Looked under hood and a blue wire was disconnected or broken from engine. Looked at manual and it may be a map sensor.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 17 Answers
  • Posted on May 27, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 23, 2009
Answers
17
Questions
0
Helped
11508
Points
28

Sounds like you have a broken belt that drives the alternator, water pump and maybe the power steering depending on engine type and size. Have the belt replaced before driving car as if you overheat the engine you could end up with major engine damage.The belt on the 2.4 litre engine is manually adjusted with a bolt on the alternator housing. To install this belt yourself maybe difficult if you do not know the routing of the belt around the number of pulleys involved. get help.

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on May 24, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 23, 2009
Answers
2
Questions
0
Helped
830
Points
8

That's mean you lost your belt,before you buy the belt at autoparts store check why did you loose your belt,check the tensioner pulley and idle pulley for a frozen pulley,it is not normal to loose a belt,you need to find why you loosing the belt,let me know,so i can assist you with some info.

  • Anonymous May 25, 2009

    no problem,try to deal with a reputable mechanic and be with only one,that way he or she will always recognize you like a loyal customer,but there is a problem there not too many good and honest mechanics at this time,i am talking for my daugthers where in many places they try to rip them off,good luck with your car and your medical career,you are almost there,best whises

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

We need the cylinder head torque specks for a 2.4 liter engine on a 98 plymouth breeze

f866f0c.jpg

Fig. 1: Cylinder head bolt tightening sequence-2.0L SOHC engine



f8b64c8.jpg

Fig. 2: Cylinder head bolt tightening sequence-2.0L and 2.4L DOHC engines

Tighten the bolts in 4 steps as follows:
a. First: all bolts to 25 ft. lbs. (34 Nm).

b. Second: all bolts to 50 ft. lbs. (68 Nm).

c. Third: all bolts again to 50 ft. lbs. (68 Nm).
d. Fourth: all bolts an additional 1 / 4 turn.

Do not use a torque wrench for the fourth step.


Hope helps (remember to rate and comment this).
4helpful
2answers

Smoke under the hood

replace the valves covers gaskets
0helpful
1answer

1998 plymouth breeze

This could be many issues, a broken timing belt, fuel delivery, ignition or computer/sensor failure. This should be diagnosed by a qualified technician if you do not know how to check these systems. Does it sound normal when it cranks, or does it sound uneven or very fast? Can you smell fuel. More details could help narrow it down.
0helpful
1answer
3helpful
2answers

Plymouth breeze

Yes, I had this on my 97 Stratus....could be a couple of things....one, the there may be damage to the wire connector harness going to that sensor. That was the problem with mine. I replaced the cam sensor, crank sensor, coil pack, mas sensor..etc...it ended up being a burnt spot on the wire harness. They said this is a common problem for the stratus/breeze/cirrus/intrepid.....the most it could be is a bad ECM....there is a bad pin on it located half way down the side where the big connector is. It is the silver block with the big wire harness going to it in the engine compartment. Try wiggling that around...the harness area.
6helpful
3answers

The Serpentine Belt doesnt fit 99 plymouth breeze 2.4L with a/c

I thought the same thing on my 1998 plymouth breeze but it was because I didn't route the belt correctly. Maybe this will help:891861b.jpg
Not finding what you are looking for?

386 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...