Trunk latch is in the locked position and i can,t close my trunk

have a look at the trunk latch mechanism.sometimes they get closed when they should be open(the fingers that lock the trunk lid closed).if its in the closed position just unlock the trunk with the key and use something to pop open the lock(fingers) then the trunk will close again.

If there are no restrictions in the trunk ,try to turn key to release already trunk latch. may need to put screwdriver in latch to help release. sometimes when you shut trunk latch will go to locking position and all you need to do is open latch with the key

There is a possibility that the remote latch cable is stuck (lubrication is gone) . With a screwdriver, NOT the fingers, try to return manually the latch, to its open position (instead of the pull open position). If you push it too far, it will go into locked position, and when you pull down the trunk lid, it wont reach its normal closed position. In that case, pull the latch back open, with the remote lever. Should you manage to close the trunk properly, spray some WD40 or some lubricant on the latch assembly.

Try a screw driver,and release the trunk release at the same time and unsnap the latch,the latch thinks it is closed,because the latch never opened back up to allow the striker to go in it and trigger the latch to close,the latch is in closed mode,you will have to manually unlatch the latch sort of speak.

either the latch is broken, repair parts will be needed, or the catch loosened and needs adjusting. does the trunk close with a motor? have you tried unlocking the trunk? maybe the latch is in the locked position or it's stuck in the latch position. if stuck, turn the key to unlock and pry with a screwdriver

The lock latch is held by a spring to be in Normal Close position. It it is in open position then there is 2 possible root causes: 1- The cable pulling the latch to open gets stuck. 2- The spring broken or out of its position. Hope this can help to fix it.

There is a possibility that the remote latch cable is stuck (lubrication is gone) . With a screwdriver, NOT the fingers, try to return manually the latch, to its open position (instead of the pull open position). If you push it too far, it will go into locked position, and when you pull down the trunk lid, it wont reach its normal closed position. In that case, pull the latch back open, with the remote lever. Should you manage to close the trunk properly, spray some WD40 or some lubricant on the latch assembly.

Try pushing the button under the dash back into its normal 'unactivated' position, and see if the trunk will latch shut. It could be a sticky latch mechanism in the trunk, which some silicone lubricant or WD40 might help to free up. Check also that the latch has not actually returned to the 'locked' position prior to trying to close the trunk. That would definitely stop you from closing the trunk properly! Try unlocking the trunk latching mechanism again.