Hood catch release cable become undone and cannot open the bonet. please help

SOURCE: Hood won't open. Cable is broken and can't get hood to pop.

NO there is no manual way . get a good flash light and look at teh latch through the grill or from under the truck and try and pop it with a long flat blade screw driver

SOURCE: hood release cable broken, how do i open the hood ?

I have a similar problem with my 1992 Oldsmobile Cutlass Supreme. The way I open the hood is to reach my hand between the radiator and the front of the car, and for me there is a bar running right up the middle if I follew that too the top, and on the drivers side of that bar should be the hood release, and I feel around till I feel the hood release cable, and then I push on the lever that the cable is attached too, most of the time this works. Hope this helps.

SOURCE: Broken hood release cable 1996 Ford F150 pickup

On each side of the latch there is an 8mm screw that can be removed through the front, between the hood and grill They are aprox 6" apart.

The latch itself has two locator pins that slide into the front suppoprt behind the grill.

After removing the two screws, gently pry the whole latch away from the support. The hood can be raised, taking the latch with it.

Access to the release lever is behind the latch. It is now exposed.
pull the tiny release lever toward the drivers side and latch will come loose. Good luck!

Harry Goodwin

• 353 Answers
• Posted on May 23, 2009

SOURCE: hood release will not release hood cable is not broken

the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet

SOURCE: HOOD RELEASE CABLE CAME UNDONE AT THE LATCH ASSEMBLY. HOW DO I OPEN IT WITH OUT THE CABLE WORKING?

remove front grille then you have to fiddle about with the catch it is quite tedious but the only way or take to a dealrship