I have a pontiac montana, but lately when I press ths remote start button, the alarm goes off. Door locks work fine.
Dec 2009.
I also have a 2006 sv6 witht he exact same problem. The battery diesd in the remote and after changing it only sets off the alarm now instead of starting? Di dyou figure out the problem?
If its an aftermaket installation, do yourself a favor and have it removed. I have seen them disable a vehicle where they won't start. Sound like the controller is malfunctioning.
1 Unlock the car, get in and close the door
2 Switch ignition on
3 Press the door lock button on the dash to lock the car
4 Press and hold the door lock button on the dash, the alarm will beep
5 Keep holding the door lock button on the dash, press and hold the lock on the remote,
the alarm will beep
Repeat (5) for the other remotes,
6 leave the door lock button on the dash, the alarm will beep, switch ignition off
1,445 views
Usually answered in minutes!
It's a stock keyless entry. I just changed the battery in the remote, and the door locks etc are working better. But when I press the start button, the panic alarm still goes off..wondering if it needs to be reset?
×