I have a Chrysler Sebring 2004 base and a few weeks ago I boost a lady in the supermarket. After that, my fuse start to blown randomly. Sometimes last a day, 4 days, a week, sometimes blown 3 times in a day. Since today, doesnt work anymore. When I put a new one (10), I can hear a click, but nothing happens. It is not broken inside like the others, but doesnt work anymore. If there are some solution I will be more than thankful in read your answers.
Check what circuits are connected around this fuse, then check each one, test voltage and wire connections.
Good luck.
SOURCE: Security Light always on, door lock fuse keeps blowing
This is most likely a problem with your Passlock anti-theft system which is known issue with these cars. Passlock is a "passive" anti-theft system, which means that it will disable your ability to start the car if it thinks there is a problem. The three components that can cause this are: 1) Ignition Switch, 2) Ignition Cylinder, 3) Body Control Module (computer). The dealer is the only one who can solve this problem (unless you can bypass it, but it is not that easy). Estimated repair from most dealers is $800 and up.
SOURCE: My 2004 chrysler sebring electical is not working.
Check around the MAP sensor area for any connections that may have been disturbed while you were replacing the sensor. Most or all of those functions are controlled by the body control module. I would think that a fault like that would show on the scanner readouts.
SOURCE: I have a 2004 Chrysler
my transmission was just rebulted and now my interior lights radio powerlocks dont work all fusses are good thats what i was told,what could be the cause
386 views
Usually answered in minutes!
Hi Nunki Vali?as, Can you check for bad wires in the doors hing area or a possible short ( wire touching each other or to metal on car) ?
Which fuse? When you put a new one, 10, you hear a click? Wheres a click coming from? Is the car starting up at all?
Hi, I will check the wires. Regarding the car, it is working ok.
×