At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you saying the blower motor doesn't work? Are you saying it blows good but no heat? If it is the latter, you may have a temp door problem, under the dash?
If the blower motor won't work, have to check wiring circuits and or blower motor.
Does the engine reach normal operating temp? On a warmed up engine, are the heater hoses, hot?
CHECK SEE IF HEATER BLOWER MOTOR WORKING, REMOVE HEATER BLOWER MOTOR HOT WIRE HEATER BLOWER MOTOR SEE IF BLOWER MOTOR WORKING BLOWER MOTOR FAULTY OR YOU HAVE FAULTY WIRING AT BLOWER MOTOR AND RESISTOR.
check fuses for blower, then if good check switch for power then check blower motor for power. run a power jumper to blower motor and make sure blower works
The blowers ion the back have there own blower motor. The front has it's own. The resister controls the range the blower motor runs on,( low, medium, high). If the blower motor is not working it may be the motor itself. Was the fuse checked:?
You will need to remove the glovebox and you will see the blower motor at the top right side. Remove the screws holding it, disconnect the electrical connector and remove it from the car. It is a tight squeeze, be patient.
remove the trim panel below the glove box and you will see the blower motor,just to the left of it you will see a 4 wire connector plugged into the case. This is the blower motor resistor,this is what you need to replace.
×