Code p0304 toyota tacoma i4

https://www.google.com/search?q=2005+tacoma+vss+A+location

well if you looked up what transmission is there.
and google that or get the service manual you'd know. it
2wd or 4wd
4SPEED OR 5?
what engine is the, big engine mate to big tranny. and not the same.

• 2.4 L 2RZ-FE I4
• 2.7 L 3RZ-FE I4
• 3.4 L 5VZ-FE V6

AND SOME 4.0l
the box is 4speed OR 5.? NOT TOLD.
i guess a A340E or A750E/F ? YES BOTH WERE USED,BY AISIN.
a Tacoma version PU.,MY GUESS IS 750 IS FOR 4.0 V6
ID ASK TOYOTA WHAT BOX IS THERE,
OR ON THE SIDE OF THE BOX(TRANNY) RAD IT OR SEE IF HE VIN CODE HAS TRANNY CODES.
THAT IS STEP ONE
THEN GOOGLE THAT OR BUY THE BOOK

HERE IS GOOGLE , ME DOING A750f AND FIRST HIT SHOWS ALL 7 SOLENOIDS THERE,AND ALL REAL NAMES.
TOYOTA SHOWS THE 2 VERSION OF 750 VALVE BODY SOLD AS 1 UNIT ONLY

THE SM MANUAL SHOW NO DTC ERROR WITH "D" LISTED
YES DTC SOLENOID "A" BUT NOT D.
WHERE YOU HEAR THIS "D" CLAIM/??? REDDIT.



AISIN NAMES REAL NOT CAR MAKERS, A/B'/C NAMES.

SEE THE OTHERS HERE

https://at-manuals.com/transmission/tacoma-2/

Question translated from spoken English to written English.
Question moved to Toyota Tacoma.

There are some videos and various ideas in this link.

https://www.google.com/search?q=96+toyota+tacoma+starts+then+dies

..

A P0304 means you have a misfire in cylinder #4. Could be a bad spark plug, spark plug wire or coil. Start with a new plug and wires. See if that fixes it

P0300: Random Cylinder Misfire Condition
http://www.autocodes.com/p0300_toyota.html

P0301: Cylinder 1 Misfire Detected
http://www.autocodes.com/p0301_toyota.html

P0304: Cylinder 4 Misfire Detected
http://www.autocodes.com/p0304_volkswagen.html

Needs a cat and need to check the injector and coil. Coil most common on that model

Diagnostic Test Code (DTC) C1244 is a "maufacturer-specific" code used by Toyota for this vehicle. Toyta defines this code simply as "DECELERATION SENSOR CIRCUIT."

Possible causes are:
> Faulty ABS deceleration sensor
> Open or short in deceleration sensor circuit
> Defective wiring harness or connectors

The deceleration sensor for your 2004 Toyota Tacoma is located under the passenger seat.

Sorry! I wish I could help you, but fault code P1036 is not a valid code for a 2002 Toyota Tacoma. Read the code again and repost your question.

In the engine bay, on the firewall, behind the engine if it's a 2.7L I4. It'll be tricky to change due to space constraints.

Here is a good site for OBD II trouble codes.  P0300: Random/Multiple Cylinder Misfires Detected, P0301: Cylinder 1 Misfire Detected, P0304: Cylinder 4 Misfire Detected.