Was driving to work when the car just died. Tried starting will turn over but wont fire. The vehicle just turns over it won't run. Doesn't sound like timing belt because you can hear the compression. Please help don't knowwhat could be wrong. Tried the fuel pump and when you turn key to on it spools up for about 2 seconds like normal. There have been absolutely no problems with the vehicle before this.
The cam position and crank position sensors need to be checked. A diagnostic test will determine the exact problem
SOURCE: I need a USED Starter for my 1999 Chrysler Concord
go to your local bone yard or salvage yard.
SOURCE: chrysler concord brake lights stay on
Switch is located under the dash and is either on the brake pedal or inline with the brakepedal... either has a clip or is screwed in...
get ready to stand on your head...
SOURCE: chrysler wont start
Sounds like a short maybe. maybe the wire completely broke? if you know a technician, see if the fuel pump is even getting power when key is on
SOURCE: 1999 Chrysler Concord won't start at times and dies while driving
Have somone check the timing belt make sure it has not jumped any teeth common problem on a old car with high mileage.
Testimonial: "I verified the problem was the timing belt. I thought it was the MAP sensor but turns out, timing belt was about to break, thanks."
SOURCE: low freon on a 1998 chrysler concord, where is the low pressure l
low refrigerent in a concorde was USUALLY caused by a leaky evaorator a big job at best and best left to a pro
486 views
Usually answered in minutes!
×