Trying to fit 3 wire turbo timer to 05 diesal rodeo not sure which wire to use on the ignition barrel
Don't have a wiring diagram but if you use a volt meter find live wire on fuse box, connect this to power wire then 2 wires to fuel stop solenoid, using the wire from the stop solinoid to timer this activates the timer and the other from timer to solenoid. This will allow the engine to start by activating the solinoid, I hope this helps
Merry Christmas
SOURCE: im trying to install a tacho into my 1993 holden
Hi Dano,
For installing the tacho on a vr there should be a single wire not pluged into anything, on your wire loom under the bonet on the LHS, this is the wire you need..
Please let us know if that was helpful enough.
Thanks
Shiv.
SOURCE: wire colour coding for radio Holden Nova LF
Car Radio Constant 12v+ Wire: Blue/Yellow
Car Radio Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White
SOURCE: 02 wireing on ecu 1999 isuzu trooper
D14 and D15 for sensor A and C14 and C15 for sensor B on connector C2 for the 6 cylinder
524 views
Usually answered in minutes!
×