I have a 2004 dodge intrepid it keeps dieing and these are the codes I got p0129 and p0441 x2
Code p0129 refers to barometric pressure-two low===causes wiring---BARO sensor, ---mechanical fault
code p0441 refers to evaporative emission (EVAP) system--incorrect flow detected=== causes ---hose connection/s---intake leak--EVAP canister purge valve
replace the BARO sensor and the purge valve after seeing that the filler cap is on correctly.
SOURCE: I have a 2002 Dodge
P0152 is o2 sensor 2/1 voltage high. Sensor 2/1 is your right bank upstream o2 sensor located in the manifold. Make sure it is pluged in.
SOURCE: code P0441
Code P0441 = evap code (auxiliary emissions control systems),You could try replacing the fuel cap first (make sure it has the double gasket), but most likely the charcoal canister has failed or you have a leak in a hose related to the evap system.
SOURCE: check engine light on code
This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.
SOURCE: Not running properly
Hi
code P0068 = MAF/MAP sensorthrottle position correlation
code P0108 = MAP/BARO circuit high input
code P0441 = EVAP emission control system purge flow fault
take it infor a service
cheers Rob.
482 views
Usually answered in minutes!
×