Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Dec 12, 2013

4wd indicator light does not light 96 dodge 1500

4wd works fine just no light where is the sensor or light switch

5 Related Answers

Anonymous

  • 32 Answers
  • Posted on Sep 28, 2008

SOURCE: 2006 Dodge Ram 1500 service 4wd light

Erik,
There actually is a sensor for the fluid, so yes. You should check the fluid in the differential. You could try to do this yourself, or you could take it to a shop you trust. Yes, it's also possible that the fluid is low, and when you are stopping or slowing down the sensor isn't picking up the fluid, so then the light comes on to warn you that it's low in fluid. Hope this helps. Please rate my solution, thanks.

Ad

marionbagget

  • 718 Answers
  • Posted on May 08, 2009

SOURCE: Where is the reverse light switch on a 1999 Dodge Ram 1500 with automatic transmission located?

Look on the gearshift lever. You will have remove the cover to get to it.

Anonymous

  • 5 Answers
  • Posted on Jun 02, 2009

SOURCE: Reverse light switch on 1995 Dodge Ram 1500

switch is just above trans pan and below shift linkage requires a thin (crome 1" socket) to remove

Anonymous

  • 2 Answers
  • Posted on Jun 07, 2009

SOURCE: How to activate 4wd hi/low on 2000 dodge durango slt

You need to get under the suv, there is a linkage under there that has 2 grommets. They dry rot and then fall out. Once that has happened the 2 pins that hold it together give way and the link is broken. If all you need are those 4 parts its $12 at the dealer. If you also need the adjustable metal linkage that joins the shifter to the transfer case you will have to order that too, sometimes it falls off when one end gets loose. It will swing around and hit the drive shaft and get yanked off. If you need more detail let me know.

Anonymous

  • 286 Answers
  • Posted on Jun 08, 2010

SOURCE: transmission swap

94,95 are the same 96-99 are the same. the 94-95 models have a 4 pin connector as the 96-99 have a round 12 pin connector. Hope this helps

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I put 2014 rims on my 2010. Tire pressure issues. screen on the dash is showing psi's blank. how do I reset? I assume these 2014 rims would have stock sensors in them, and there basically brand new.

Some Chrysler ,Jeep and Dodge vehicles have ttye pressure sensors calibrated to the vevicle,so therefore if you change the
tyres to a different type you will need to take your vehicle to a C.J.D.
service department to have the computer of your car re-programmed to accept the new tyres
0helpful
2answers

2008 Dodge Ram 4WD LOW light blinks while running in 2WD. When applied the 4WD High works fine as well as the 4WD LOW but the light keeps blinking and you can hear the system trying to apply 4WD LOW

Replace the motor/module on the transfercase. It has an internal short. Don't replace it. Soon you will have to replace or rebuild the transfer case and the motor.
1helpful
1answer

Would i be able take the body , engine ,transmision and other parts from my 96 2wd dodge ram frame and put them on a 96 or other year 4wd dodge ram frame?

If it is same engine and same transmission. Otherwise computer controls won't work. For that reason it is not a good idea to go different years: connections, sensor locations, computer parameters, all may differ. Research it carefully.

A big project you are thinking of, a lot to consider. Connecting the transmission to the transfer case, getting all the controls in the cab working. Brutal! I wouldn't even consider it, but then I am retired and prize my leisure. Good luck with it. For the amount of time involved, easier to consider a 4WD that just needs an engine or engine and transmission.
1helpful
2answers

1999 Dodge Ram 1500 5.9 Overdrive Not Working

CHECK FOR POWER TO TCC. WHEN ENGAGED .IF YOU HAVE NO POWER THE OD SWITCH IS MOST LIKELY BAD
0helpful
2answers

My 96 dodge ram 1500 4x4 with a 5.2 ran great and

Kind of sounds to me like you have an o2 sensor problem.
0helpful
1answer

1998 dodge ram 1500 dash lights wont work

Walker Muffler - Aluminized Steel Direct OE Replacement 1998-2001 Dodge Ram 1500.-------------------------------------------------------------------------------------
SLIM HID XENON light
0helpful
1answer

Ok i have a 97 dodge ram 1500 sport 4wd 5.2 l 318ci and my brake lights dont work the tail lights come on fine the fuse is good there is power at the light i checked with test light i am dumbfounded any...

There is a brake switch on the pedal about half way up. check this and see if you have power coming out when depressed. If you do then the problem lies in the turn signal switch, Some times it's a loose wire.
0helpful
1answer

ABSlight and Brake light come on and off, but

could be, check brake fluid, if you have computer scaned you will be able to pinpoint problem, may be a sensor dirty or going bad, good luck.
9helpful
1answer

98 dodge 1500 ram speedometer not working sender

ABS LIGHT ON AS WELL?IF SO..I WOULD LOOK AT ABS SENSOR IN REAR DIFFERENTIAL..GETS SPEED SIGNAL FROM THIS SENSOR AS WELL..USES ONE IN TRANS FOR TRANS SHIFTING
Not finding what you are looking for?

79 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...