At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
ok the track doesnt even move could id be my gears are broke on my power windows ok the track doesnt even move could id be my gears are broke on my power windows
Re: i have a 93 linciln town car all 4 off my power...
If you here the window motors running then take off the inner door panel and make sure the window gear is engaged into the motor. If so and the track moves up and down then the window came out of the track holders and has to be glued back in it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Probably is only one fuse, just check all the fuses in the fuse box. Check for broken wire in the door jam, but you may need new window motor or new control switch on the armrest. Is there any noise from the door when you push the buttons? If you hear the motor running, then you need that track that pushes the window up and down.
One common problem that occurs with faulty power windows is a faulty Chrysler Town and Country window motor. You can obtain access to your Town and Country window motor by removing your interior door panel, where you will also find your window regulator.
The window regulator is a collection of gears and arms that controls the up and down motion of your windows, and your window motor is the component responsible for turning those gears when you press your window switches. If your windows are not working, your first step should be to determine whether the problem lies with your window regulator, or your Chrysler Town and Country window motor.
You can often do this by listening when you press your window switch. If you hear a humming or a grinding sound, this usually means that your window motor is still trying to work, but your regulator is stuck. However, if you don't hear anything at all, then there may be a problem with your fuses, your wiring, or your Town and Country window motor. Over time your window motor may develop problems due to grime buildup, or simply wear and tear through normal use. You will find a full line of Chrysler Town and Country window motors right here in our online catalogue, along with the fuses, wiring, window switch kits, and window regulators you need.Enjoy our great low prices and fast reliable shipping on all Town and Country window motors as well as all of our high quality auto parts and accessories.
If you can hear the motor for the window but it doesn't work the regulator is bad. If you can't hear the window motor the motor is bad or the fuse is blown for the power windows. I would start by checking the fuses.
If the motor is running,then the regulator is bad,or a more likely cause ,the gear on the motor is stripped out,it is replacable,parts store has it for about 20 dollars
If you hear the motor, and the window does not go up, you need what is called a window regulator. You can but them sometimes with out a motor to save a few dollars, but I don'trecommend it. Buy the one with the motor already in it. It can be a trip to install your motor on the new regulator.
Also this is not a terribly expensive labor charge to install, you do need a little expertise and some special tools to install it so I would recommend you take it to a shop you trust.
2 screws on door pull and door clips around outside edge of door panel pop out with flat screwdriver then remove panel some motors you can replace just the plastic gears oriellys parts stores carry them obout 15 bucks good luck
THE WINDOW REGULATORS ARE NOTORIOUS FOR GOING BAD ON THESE CARS. REMOVE THE INSIDE DOOR PANEL TO ACCESS THE REGULATOR IN THE DOOR. YOU WILL HAVE TO PULL AND PROP THE WINDOW IN THE UP POSITION TO REMOVE THE OLD REGULATOR. HOPE THIS HELPS. KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. BEST OF LUCK.
If the window regulator motors are running & the glass is not moving, then either the drive assembly is broken & you need new regulators - which is the most probable cause, or the bottom window channel that it hooks to, got unhooked or separated from the glass. Hope this helps you, Rick
take off door panel and see if the regulator is rusted or there may be a bind in it use white litham grease make sure your hands are out of the way when operating the motor
ok the track doesnt even move could id be my gears are broke on my power windows
Check your fuses first before you start tearing things apart.
how do you take off the inner door panel
×