- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove arm rests usually couple screws same with door handle opener one screw.some door trims have screws around remove them disconnect wiring harness when are rest off for electric windows then just carefully pull trim start on one corner
more than like if its just on door that wont look and the hoon sounds the door actuator will be faulty and you will need to replace the actuator.
To do this you will need pull the inside door handle off.
remove all door trim covers to access screw and disconnect mirror wiring.
remove all screws around door trim.
very carefully remove door trim once the trim is off you see a plastic inner door liner don't rip gently remove half .
look inside door and you will see the door actuator and lock,carefull lift up locking tabs so you can remove all door rods from actuator.
on the outside of door undo the 3 bolts and actuator will come out.
get the new actuator and fit it the same way the old one come out.
Before refitting the trim grab some silicon and reseal plastic to door to keep water out..
To Replace bonnet struts on a wk statesman you will need to flow the procedure below.
1.Open the bonnet fully
2.Replace one at a time .
3.Now bonnet is open grab pole and place under bonnet for extra support.
4.The strut will be mount to a ball and on the side you will also see a little rectangular clip .
5.Use a small flat blade screw drive to pop clip out once the clips out you will be able to gently work the strut off the ball on top and bottom.
6.same procedure to fit new strut
try the Holden wreckers for a replacement . many statesman parts are interchangeable with the same year Holden sedan series.. There are after market reservoirs that will fit as well.
×