1995 Toyota Land Cruiser Logo
Posted on May 11, 2009

Toyota Land Cruiser fuel tank warning light on

The fuel tank warning light is illuminated on my 80 series (1995) petrol Toyota Land Cruiser after suffering from a flat battery. There is fuel in the auxiliary tank but the pump will not move the fuel from the reserve to the main tank when the button is pressed. The light on the button stays on for about 1 second when pressed then is extinguished. The pump itself works OK when connected directly to a battery. Any ideas?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 25, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 10, 2010
Answers
1
Questions
1
Helped
2556
Points
3

Hi There. Have the exact same problem on my 95mod petrol with the sub fuel tank not emptying. think it may be the relay but cant find it. The earlier models have the relay in the rear wheel well, but ours are set up differently. had the whole car to pieces but still cant find it. Was wondering if you had any luck with yours and could enlighten me. Thanks [email protected]

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Have an 80 series 40th anniversary land cruiser .have problem with petrol when driving in high altitudes in vic high country where I can smell petrol vapour & petrol tank expands causing petrol to...

when fuel expands is it supposed to go into the canister under the hood in the engine compartment and then get recycled back into the fuel system when you start the car maybe there's a problem with your polution control
1helpful
1answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings

Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees
0helpful
1answer

WHEN I TURN SPOTLIGHTS ON IN 80 SERIES CRUISER TACHO STOPS WORKING ANY IDEAS

Trace the light wiring, it is probably wired incorrectly, you did not stipulate whether the engine is diesel or petrol, either way the wiring sounds like it is wrong.
2helpful
2answers

The fuel tank warning light is illuminated on my 95mod 80 series

Just a thought.I don't think the tanks transfer fuel.They draw the fuel from one tank or the other.I may be wrong,but have a look.Hope this helps
0helpful
2answers

Broken sub tank switch in 80 series toyota landcruiser

Replace it. Most switches are mounted to plastic snap clips than can be removed with a simple Flathead screwdriver.A $5 plastic pry tool set is the best, but a butter knife or two works wonders sometimes.
0helpful
1answer

I have a Toyota Landcruiser 80 series FZJ80, it has a dual petrol & LPG.While starting with petrol it cranks longer

Petrol has a different ignition point than LPG. You might want to get your fuel system recalibrated.
1helpful
1answer

Where can I find out about what the 1995 Toyota Landcruiser 80 Series warning lights mean?

if it was me i would call a toyota dealership and that way you will know right away what it is because this is something you do not want to wait on because it could be something that will cause damage to your engine are stop by the service department and they can tell you what it is good luck.
4helpful
2answers
Not finding what you are looking for?

2,566 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...