Hyundai getz light fuses

All items controlled by the Body Control Module. You need to find a local auto electrician to connect a pro grade scan tool computer and look for communication issues.

https://www.google.com/search?q=auto+electrician+near+me

Here is the fuse box diagram, but nothing in there that looks suspect.

Hyundai Getz (2006-2010) fuses and relays

https://fuse-box.info > hyundai > hyundai-getz-2006-2...

Instrument panel - Here you will find fuse box diagrams of Hyundai Getz 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse ...

The power windows circuits are controlled by the Body Control Module (BCM) have it self tested for proper function.

pull each fuse out 1 by 1 and replace each 1 by 1 untill you find the blow fuse. Blown fuses look like =

With all respect, my Hyundai has a similar problem and it appears to be an over-voltage problem. If you can access wiring diagrams, do so and verify all is OK. Particular attention to the quality of earthing is reccomended, as this can cause voltage issues.

This has just happened to my 2007 1.4l Hyundai Getz did you find out the problem... Can't get in to fix till next week...

On this website you find fuse box diagram and description for Hyundai Getz

https://www.carknowledge.info/category/hyundai/hyundai-getz/

https://www.autogenius.info/category/hyundai/hyundai-getz/

This could be a few other things: try these: (have a diagnostics test done at a local auto parts dealer or mechanic (auto parts dealer will usually do it for free and only takes abotu 10 mintes).

1. O2 sensor(s) : replace

2. temperature gauge sensor

3. oil pressure sensor (regulator)

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

hi from uk for your info there was a recall back in2004/5 for the getz relating to the abs system going faulty my wifes 2003 getz gsi was recalled and i took car to dealers for her to enquire what fault has there beenon some getz with abs system? as fault had not occured on ours ? apparently there had been a fault with the wire loom to pump particularly the earh cable deteriating ? so this loom had to be inspected and replaced under warranty however as i had waxoiled all underneath our getz including abs pump due to its location low down the loom was ok but was changed anyway and recorded and a dated sticker placed on cars glove compartment door inside to verify loom changed ? SO b4 you progress any further i would check with hyundai tech dept to whether you car had been inspected or whether slipped through unchecked ? your gran should have had a recall as we did for modified loom hope this helps?

dear friend -the fuses you describe is cluster fuses and has nothing stopping or starting of the engine.they are joint in a yellow holder.i think you might have a short be hind the fuse box,thats wh you keek on blowing that fuse.

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.