Need diagram to install serpentine belt

you should be able to get a diagram from the part store you got the belt from

The serpentine belt routing diagram for a 2001 Volvo 2.4 V70

go into auto zone and they will print you a copy of how to install the serpentine belt with pictures

Look under the hood or in your owner's manual. Many manufacturers place the belt diagram on the underside of the hood, on the strut housing, or near the front of the engine.

2001 ISUZU RODEO - V6 3.2L 3165cc GAS FI N W 6VD1



Hope helps (remember rated this).

If you have a 4 cylinder check out this sight for a diagram of serpentine belt http://www.thesaabsite.com/93/93pulleys.htm#BELT+%26+PULLEY+SETUP+%28NOT+SPORT+SEDAN%29

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/2001/make/isuzu/model/rodeo/2001_isuzu_rodeo_drive_belt_routing_diagram.htm

there should be a diagram under hood, in front of radiator

there ya go!

I believe that you need a 14MM or 15 MM wrench a long one would be the best since the spring is hard to move. There should be a nut on the tensioner pully #6 on the picture below. This is where you need to move the tensioner with one hand and pull the belt off with the other. It might be easier with 2 people. Remember the belt routing it will help when installing the new belt. Good luck.