Wanna know if i can put a tranny for basic 1995 riviera in my Supercharger

that's funny I have the same problem kinda. my supercharger broke and now my battery keeps dying. I would replace the battery and get all the wiring back there checked out. are you interested in selling the supercharger?? email me at [email protected] I can give you a brand new battery, brand new terminals and some cash. 10.24.13

1.Jack up the vehicle
2.Place a rag under the supercharger bolt hold you will remove
3. Remove supercharger bolt, some oil may come out but not much.
4.**** out the old oil
5. Lower the car back down
6.Fill the supercharger oil
7.First time driving after change

MAP SENSOR ON TOP OF INTAKE BESIDE THE SUPERCHARGER. TAKE THE NEW MAP SENSOR USE IT FOR REFERENCE LOCATING OLD MAP SENSOR. WHEN YOU SEE IT ON INTAKE IF MATCH UP WITH OLD MAP SENSOR THEY MATCH UP YOU LOCATED THAT IT.

Faster and safer to drop the whole unit from the bottom with the cradle. Replace the supercharger snout bearing and seal before you install the replacement engine and the supercharger belt. Also replace the boost valve to your transmission just to ensure your getting the proper transmission line pressure throughout your transmission.
Thank you for using fixya and be safe

if your supercharger sounds like tumbling rocks, it is the plastic coupler between the nose cone and the charger body; take off your serpentine belt; chances are the pulley has some play in it but it turns freely; the replacement coupler is a cheap fix; what gets a lil pricey is the labor to replace it... the buick has an alternator bracket that has to come off before you can take the nose off of the supercharger... dont forget to drain the oil from the nose cone with a spray bottle nozzle

Yes. Does the supercharger belt run anything else? I can't remember.

You should also swap the transmission if the motor is going to be more powerful. Also a new computer will be needed for the swap. If you are looking for an easy swap then just find the same motor.

Sorry for the delayed response.
CLICK on the following LINK. It has the Belt Diagrams including the Supercharger you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/1995/make/buick/model/riviera/1995_buick_riviera_drive_belt_routing_diagram.htm

there is an a ideler pully that is at the very bottom on the engine u have to move that and put the belt on there i think if u put it on the super charger first then the powersterring pump

you can not put a regular 3800 intake in place of the 3800 super charged engine,the compression ratio is lower than the regular 3800 engine.......!