SOURCE: How can I bypass a anti auto theft system on my 1990 cadillac seville?
I Have A Seville 1990, When That Happen To Me I Got The Inginion
Replaced Problem Solved. What Is Happening Is Your Key Has A Chip And That Chip Is A Resister And When The Valve Is Not Sented To The Computer It Disengages the Fuel Pump And Than Tells You To Wait. Soon All That Will Happen Is You Will Get The Wait 3 Mins And It Will Never Start, A Good Locksmith Can Take Care Of This For You And That Will Save You Some Money. Cause If You Go To The Dealer Ouch They Will Hit You Up. But I Asure This Is How It Will Happen Cause It Is How It Happen To Me
And Sorry There Is No By Passing The Computer
SOURCE: Anti-theft system stuck triggered
Doing roadside assistance I have ran into this problem several times and if you look in your owners manual it will tell you how to reset it. Some of the cars you have to wait up to 10 min. with the key in the ignition and try again. The light will go out. READ carefully our owners manual.
Hope this helped....Kevin
SOURCE: 1997 ES 300 How to reset anti-theft system when car won't start
With the doors shut, insert the key into the drivers door lock. Lock and unlock the door 5 times. This should reset the system. If that doesn't work you should contact a qualified repair shop.
SOURCE: How to remove or bypass the factory installed anti theft vehicle immobilizer.
in the 1996 sunfire GM uses an anti theft lock system. It can be triggered by all sorts of things. In order to relinquish this you must have a key to turn the ignition. These are not coded just plain cut keys. Once you attain this you put the key in and turn the ignition to the ACC position and wait ten minutes (theft lock light will turn off), turn off and take key out. You MUST do this 3 times and then the theft lock will be disarmed.
SOURCE: 1999 Pontiac Sunfire ignition lock cylinder
try turning the ignition on try to start then without shutting key off wait 10 mins then shut key off then back on but do not try starting leave on for ten mins then back off turn key back on to run but do not try starting it wait ten mins then if it reset it should crank over and start if not repeat all steps again
815 views
Usually answered in minutes!
×