I replaced my radiator and then went to work the truck started fine. i finished the job in three hours and then tried to leave but truck wouldnt start so i got a jump from a friend. it made it home fine but when i turned it off it woulkdnt start. i replaced battery today and its the same problem. except now i dont even hear the starter clicking now. PLEASE HELP!!!!
SOURCE: car wont start radio,wipers,gauges,turn signals dont work
Check the battery cable ends to be sure they are tight and wont twist, I had this happen on my 96 grand caravan two years ago.
SOURCE: 2001 dodge ram 1500 wont start
1st is the batt. old? second it could be the batt. cable ends when you jumped it the jumping vehicle made a connection the third poss able option is the starter
however if the batt. is old and bad it will make the computer scramble and fail to fire up even if it rolls over, disconnect batt for 2 min. jumping will not hurt it iether as long you are doing it in a safe way
SOURCE: When I turn the key to crank my Dodge Ram 2500, nothing happens.
Is this a manual or automatic tranny? I would be looking at the gearshift selector, did you try starting it in neutral, as opposed to park, if it's an auto, and how about a switch on the clutch pedal to prevent starting in gear, if it's a manual? How about wiring to the neutral safety start switch? Any fuses, circuit breakers been checked? What year truck?
I'm just throwing things out there, just to check before you spend any more money that you don't have to.
I could use a battery, right now- got an extra one?
:-)
Good luck and keep us posted.
[email protected]
SOURCE: When I turn the key to crank my Dodge Ram 2500, nothing happens.
your starter solenoid is out. may have even blown a fuse under the hood in the fuse box in front of the driver. i believe it is a 30 amp.
166 views
Usually answered in minutes!
×