It could be if you tail light bulb and brake light bulb are the same bulb. You might have put the bulb in the wrong way round so the two silver bits on the bottom of the bulb joins the 2 wires together so when you brake the side lights come on and dashboard lights up or the other thing it might be is a broken wire hope this helps
SOURCE: 1998 gmc sierra brake lights
did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.
SOURCE: No Brake Lights, unable to switch from park to drive
It is not the multifunction switch. The power feed goes thru the brake switch before the multi function. You have no power the the brake switch because your shift interlock is not allowing you to shift it. I'll look up the wiring diagram and repost with a solution.
SOURCE: audi a3 brake light problem.Changed fuse,bulbs and
hi check behind the light assembly itself could be its not earthing out due to corrosion your mounting screws are your earthing point it only takes water getting in behind to cause this hope this helps
165 views
Usually answered in minutes!
×