1995 mazda astina where would the compliance plate be?

SOURCE: mazda astina water pump

remove rocker cover, harmonic balancer and belts, remove timing cover and you will find the water pump on the left side of the timing belt set up good luck mate it is a little tite in there

SOURCE: mazda astina pop up lights wont go back down

Try to check if there is something stuck to the motor of the pop-up lights mechanism. You can see it below the fenders. The fender liner should be removed.

SOURCE: 1989 mazda astina 323 5 spd manual clutch fluid??

Check the brake fluid resovoir, on the side there could be a hose coming off it part way down the side sharing the brake fluid to the clutch master cylinder

SOURCE: why is the new clutch slipping on 995 mazda astina

rebleed the slave cylinder, there may be a leak and air gets trapped in system. make sure fluid is at proper level when bleeding the system. good-day !

Marvin

• 85242 Answers
• Posted on Feb 16, 2012

SOURCE: 2000 model mazda 323 astina cylinder head bolt torque specs

Three stages with new bolts (a must), 1st 60 pounds, then 70 pounds then final torque is 80 FT Pounds.