- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solution: Elect lock activator inside door either weak or is binding not pulling lock all the ... Right passenger door wouldn't open from outside, then my kid turned on the interior ... civic door won t open from inside or outside fix no drilling ... Has recently started to just suddenly lose power and stop but i can start it again and it ...
Tesla MotorsFor some reason, the passenger side front door will not open when pulling on the handle. We have the tech ... There's nothing you can do to fix it yourself. ... I tried locking and unlocking it at the restaurant and that didn't work so I just opened it from the inside. ... Handles extend, lights work, but I can't open from the outside.
that's no fun removing one with the door closed.. Try everything first make sure key has door unlocked try to open from inside and outside. If not get a slim jim and try that to open door.. Taking door panel off with door closed is not good ..
Remove the inside door handle cover , Take out the piece that has yhe rods attached to it . There is 2 black plastic pieces that one opens the door and the other one locks the door. One is broken . The one that opens the door from inside, Reolace the piece and put the rods back on. put cover on . Done.
The door may be able to be opened with a "slim jim" or similar device. To do this you need to know the mechanical details inside the door. Opening up the other rear door sounds drastic but it might help. If you can get it open then it should not be closed until it is fixed.
One way many car doors can be opened is to remove anything that is in the way of removing the inside door cover such as the bench seat and then remove the door cover. The rods and levers, etc can then be manipulated to open the door.
I have exactly the same problem with a 2002 X5. The passenger door handle has no resistance on it from either inside or outside and as such I cannot open the door. I am now wondering how to get the trim off to see what is bust inside. Anyone got any ideas??
remove the door panel and see which linkage rod is disconnected but to open door move linkage leaver by the rear of door and will move the latch opening the door
Your door latch assembly may be compromised. It could be rusted, the electric solenoid (if it has one) may be seized. Or the rods from the key are bent. Are you using th key in this door regularly? If not, the tumblers in the lock may be seized. Spray some WD-40 in the lock where the key goes, and jam the key in & out repeatedly, and retry. Remove the door panel & spray the interior of the latch, also. Hope this works for you; or, you are going to need new latches.
×