1987 Honda Prelude Logo

Related Topics:

A
Anonymous Posted on Nov 08, 2013

1987 HONDA PRELUDE CRANKSHAFT TIMING MARKS

CRANKSHAFT TIMING MARKS AND LINE UP

5 Related Answers

Anonymous

  • 28 Answers
  • Posted on Aug 18, 2008

SOURCE: crankshaft pulley timing marks

the red mark is where the timing is supposed to be after u have bypassed the electronic advance.the first white line on the left is tdc.
thanks for useing fixya

Ad

Anonymous

  • 81 Answers
  • Posted on Dec 31, 2008

SOURCE: 1992 Honda Prelude Timing Belt Diagram

There's no such thing as a timing belt diagram.

Do you mean to say the "Procedure" for changing a timing belt in a 92 Prelude?

By asking such a question I can only interpret it as a clear indication that you've never changed a timing belt before.

If this is true, then you don't want to start out or practice on your own car.

Get the car to a pro and have the job done right.

If not true (and you've changed timing belt's in the past)

Then give me the engine size and I'll post the:

"PROCEDURE" for changing the belt in a few hours.

Anonymous

  • 362 Answers
  • Posted on Feb 28, 2009

SOURCE: I've replaced a timing belt on a 1995 Honda Civic

Here you go....

90565d1.png

jjjhandyman

Joel Mallory

  • 145 Answers
  • Posted on Aug 30, 2009

SOURCE: no power to fuel pump 1987 honda prelude

fuel cut relay in drivers dash fuse box. it is located on back side of fuse box,remove and jump (at fuse box )terminal 1 and 2 where relay was removed from.you should then have power to fuel pump.if so repLACE RELAY

Anonymous

  • 617 Answers
  • Posted on Dec 08, 2009

SOURCE: need timing diagram for a 1987 honda crx 1.5l sohc

3ec524b.jpghope this helps!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to set crankshaft timing on 1992 honda prelude 2.3 liter?

here is a u-tube video with a good tip for making sure the timing marks dont get move once set may help
How to replace timing belt on Honda Prelude 92 96 2 3 lt H23a1
1helpful
1answer

Where is the timing marks on a 91 honda prelude 2.0 si

The timing marks are on the timing belt cover on the front of the engine right above the crankshaft pulley.
0helpful
1answer

Timing marks for 88 honda prelude

Hi, this timing mark is for the 85 model, but they are the same..
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft AND Guidelines that you will need.
"Align Mark on Camshaft Sprocket with the Valve Cover Surface."
It also has a variety of other Diagrams for your future use.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1985/make/honda/model/prelude/1985_honda
0helpful
1answer

I cant find the timing marks on my 85 honda prelude i have the manual and it says they r on the crank case cover but its not there

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft AND Guidelines that you will need.
"Align Mark on Camshaft Sprocket with the Valve Cover Surface."
It also has a variety of other Diagrams for your future use.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1985/make/honda/model/prelude/1985_honda_prelude_timing_belt_diagram_marks.htm
3helpful
3answers

Need timing belt diagram for 93 prelude 2.2 duel overhead cam

I have the diagram you need if you want me to send it to you. Send me your email address and I will send you the pictures and explanations on how to time it. [email protected]
1helpful
1answer

Need a picture or diagram of top dead center/86' honda prelude 2.

From what I see in my manual,

1.There is a Timing Pointer on the back of the engine. There is a White mark on the flywheel. The white mark must line up with the timing pointer, for Number 1 piston to be at Top Dead Center.

2.Facing the engine, looking at the camshaft sprocket. The sprocket has spokes. On one of those spokes is the word, "UP" in raised letters, or there is a small Dot. As you can see here, the spoke with the word UP goes -> Up.
(Same thing of course if it is a Dot, instead of UP)

On the back of the camshaft gear, (Sprocket), are marks. On the edges of the camshaft gear. These line up with the top edge of the cylinder head. The surface of the cylinder head, where the valve cover bolts down to.

I'm sorry, at present I do not have a website, that I could link you to for a diagram, or photo.

1helpful
1answer

I have a 84 honda prelude cannot find TDC on the crankshaft gear need help

You line up the crankshaft at TDC byaligning the marks on the flywheel/flex plate with the pointer on the bellhousing. On the radiator side of the engine block where it bolts to the trans mission about half way up there is a rubber plug witch you can remove to gane access to the pointer on the trans bellhousing to line up the timing marks
0helpful
1answer

Need to find out tdc for the camshaft gear

Align timing pointer on transmission bellhousing with white T.D.C. mark on flexplate or flywheel, make sure up marks on each camshaft pulley at top and align marks on each pulley aligned with the edges of the cyl. head.
0helpful
1answer

HOW TO CHANGE THE WATER PUMP

There is no easy way, the water pump is driven off the camshaft belt, you must pull the timing cover to remove the belt, line up all the timing marks before you remove the belt, don't reuse the belt.
Not finding what you are looking for?

505 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...