Question about 1999 Lincoln Town Car
How do i replace the wiper motor on a 99 lincoln town car
SECTION 501-16: Wipers and Washers
1999 Town Car Workshop Manual
REMOVAL AND INSTALLATION
Mounting Arm and Pivot Shaft
Motor —Windshield Wiper Removal
Posted on May 14, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hello Callahan5922....this sounds like a stuck blower motor resistor. I assume the blower won't function in the a/c mode either? If you have a digital multimeter you can check this. I believe it's fuse #2....if the digital indicator goes up or down when you increase or decrease the fan speed thats good. Locate the blower motor resistor....you wil find it located on the fire wall behind the right valve cover hiding behind the heater hose, it's about the size of a cigarette pack. With the engine off, and key in on position, turn the A/C on High, and rap a tap tap tap on the resistor. You might be suprised when the blower motor takes off a runnin,
I hope this is the answer you need and i was able to help solve this for you. Good luck...
Posted on May 13, 2009
I will make an assumption here, we know what the root word means. This code was extracted from the computer by? What this is telling you one of 2 things: The Bank 2 oxygen sensor down stream of the catalytic converter (there are 2 converters, one for each bank of cylinders on the 4.6ltr engine) is bad and/or that the Bank 2 catalytic converter is no longer doing the job it was designed to do. Simply, Catalysts wear out. They are good for approx 100,000 miles (as required by Federal Law). Again, I assume that the reason the intake manifold was replaced was because it had a crack in one, or more, of the runners? (part that feeds the head of a manifold). It may have taken a while to find this as being the cause of why the car running incorrectly, maybe rough. This means, that during the time the car was being driven with the problem, the amount of unburned, or not within spec exhaust gases, coming off the side of the engine affected by the intake issue was higher than normal. This out of balance level of exhaust gases were being dumped into the converter on that side of the engine, thus causing the converter to have to run hotter, work harder, or even at the time the gas was being processed through, causing deposits to be formed in the converter, thus shortening it's life span. The Bank 1 side of the engine, apparently, did not have the issue and it's catalytic converter's life was not affected. I hope this makes sense to you.
Posted on Aug 19, 2009
Tips for a great answer:
Jul 04, 2018 | Lincoln Cars & Trucks
Apr 14, 2013 | 1999 Lincoln Town Car
May 17, 2012 | 1999 Lincoln Town Car
Sep 05, 2011 | Lincoln Town Car Cars & Trucks
Sep 26, 2010 | 2000 Lincoln Town Car
May 09, 2010 | 1995 Lincoln Town Car
Jul 24, 2017 | Lincoln Town Car Cars & Trucks
3,514 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: