Where can find a fuse panel diagram for a 1986

Keith, 90 Toyota pickup 2.4 Fuse diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Wiring Diagrams Wiring Diagrams AutoZone com
90 Toyota pickup 2 4 Fuse diagram Google Search

Hi David,
Thank you for your request.
I have ther fuse block diagram and legend for your 1991 Toyota Pickup. The diagram that I have is in PDF format. I cannot post it on the FixYa site because of size and copyright restrictions.

FixYa does not give me your email address when you purchace my services. Our initial contact is only through the FixYa site. Please reply with your email address and any questions you have. I will be happy to send you the file containing the diagrams that you requested as well ans answer any questions you may have.

Dave (dttech)

visit this link i used thes for my 1980 toyota pickup and they work perfectly hope this helps

Try changing out your turn signal flasher.it might be under your dash by your fuse box.Some trucks have two one for turn signals one for 4 way flashers.By all means check the fuse first.

Is it not on the inside of the fuse box cover?

chiltons manual will have that diagram. and are you sure its only supposed to have a 10a fuse that doesnt sund right for those items listed.

try going online for 86toyotatruckrepairmanuals

yes, you must remove the top panel on the fuse block the 80 amp fuse is bolted to the the fuse panel, hope this helps if not get back to me as i strive to be the best please rate my fix Thanks Ray

When I use my turn signal in my 1986 toyota pickup every 5-6 uses it blows the fuse and my blinkers, backup lights, gas gauge and temp gauge stop working. What is going on

from the bottom with fuse 1 being closest to the door
1 - Radio 7.5A , Wiper 20A , Engine 10A , Next row up - cig lighter 15A , Gauges 10A , Ignition 7.5A , Next row up Turn 10A , Stop 10A , Tail lights 10A , Next row up Defog 15A.

However if you just want to install a CB find an ignition live under the bonnet and run it from there with an inline fuse or direct from the battery using the same. You will not flatten the battery as if the CB is off it draws no power. Another option is to piggy back the ignition live from the radio cassette !.