1999 Ford Crown Victoria Logo

Related Topics:

A
Anonymous Posted on Nov 01, 2013

Crown vic police interceptor check engine code P1507

5 Related Answers

ltfrc

Mike Schmidt

  • 227 Answers
  • Posted on Jan 17, 2009

SOURCE: 2005 Crown Vic Police Interceptor: Starts then stalls

Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.

Ad

Anonymous

  • 61 Answers
  • Posted on Mar 23, 2009

SOURCE: auxilary power, electric windows, cigarette lighter and radio not working

Since all fuses are okay, I would start my trace from the fuse box and pick the easiest wire to trace which would probably be the lighter or aux. Check for any breaks in the line or any lose connections. It seems like a harness may be disconnected or cut.

dodge360

  • 66 Answers
  • Posted on Jul 07, 2009

SOURCE: 99 crown vic police interceptor steering wheel??

i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!

Anonymous

  • 65 Answers
  • Posted on Oct 06, 2009

SOURCE: 2000 crown vic police interceptor bypass a/c clutch pulley

you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,

gerardo_cp

Gerardo

  • 5 Answers
  • Posted on Jan 10, 2012

SOURCE: I have a 1999 Ford Crown Victoria Police

Is the same trans the only thing different on a police package is a better suspension and the ECM is program different so it could have more RPM and the trans will shift difrent. but is all in the ECM.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have p1747 code will that lite up the red light top right corner of my dash on a 2000 crown viv police intercepter

That is a transmission code...

P1747 (EPC Shift Solenoid). Not uncommon for police interceptors...

Here is a discussion of other possible causes:

http://towtalk.net/forum/topic/2000-Crown-Vic-Police-Interceptor-.htm
1helpful
1answer

2006 crown Vic police interceptor former police

The police package interceptors had a common problem with the fans seizing up. There was a TSB ford released to correct the issue which called for the replacement of the electric fan assembly with an updated fan assembly.
0helpful
1answer

I have two questions 2001 ford Crown Vic LS, Codes read: (p0720 output speed sensor circuit), & (p1131 lack of heated oxygen sensor bank 1 sensor 1 switch indicates lean)........Keep in mined that I...

The PCM is programed for the LS engine parameters and now that you have changed engines the signal from the new engine are out of parameters> Either see if you can get the PCM reprogrammed at a dealership or purchase a new PCM and program the chip with the police engine interceptor to the vehicle> you may also return to the place where you got the engine and purchase the PCM for the police vehicle.
0helpful
1answer

Looking for rearend for ford crown victoria police interceptor

I have one. [email protected]. Selling my 1999 crown vic PI on Unocardealers.com zip code 55057. Please check it out.
2helpful
1answer

2000 crown vic police interceptor bypass a/c clutch pulley

you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,
0helpful
1answer

99 crown vic police interceptor steering wheel??

i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!
0helpful
1answer

2005 Crown Vic Police Interceptor: Starts then stalls

Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.
Not finding what you are looking for?

51 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...