First you need to get a good drain pan and drain the antifreeze out of the radiator buy turning the Valve wich is located usually on the side towards the bottom or on the bottom of the radiator.
2.remove the bolts that hold on the fan shroud there is usually 4 bolts.
3. move the fan shroud towards the engine and now remove the radiator hoses be carefull with the lower because there is going to be antifreeze in it yet.
4.very very carefully loosen the Copper lines going into the radiator. these lines are your Transmission cooler lines and are very easy to twist off.
5. remove the radiator mounting bolts and remove radiator upwards. instalation is in reverse of this
hope this helped you out
please rate me
thank you
359 views
Usually answered in minutes!
×