Firing order for 97 chevy blazer

Here is the firing order and spark plug wire routing diagram for a 2006 Chevy Impala LT 3.9 V6:
Firing order: 1-2-3-4-5-6
Spark plug wire routing (starting from the driver's side):

• Cylinder 1: connect to the coil tower closest to the driver's side headlight
• Cylinder 3: connect to the coil tower next to cylinder 1
• Cylinder 5: connect to the coil tower next to cylinder 3
• Cylinder 2: connect to the coil tower closest to the passenger side headlight
• Cylinder 4: connect to the coil tower next to cylinder 2
• Cylinder 6: connect to the coil tower next to cylinder 4

Note: Make sure to route the wires properly to avoid cross-firing.

Uh, the actual firing order is 1 2 3 4 5 6. There should be a sticker under hood that shows proper wire routing to the 3 coilsI need help with the 97 3.1 v6 monte carlo ls firing order?
The firing order goes 1-6-4-3-5-2 im pretty sure im not too familiar with v 6's

4.3L v6 engine?

Already answered on this site!

Firing order diagram for 1996 blazer 4 3 eng

Took a few seconds with the power of Google search

1-6-5-4-3-2 The driver side is odd and the passenger is even. front of the motor is low number cylinder going up to the firewall

165432

1-6-5-4-3-2
heres a link to help you, good luck.
http://images.google.com/imgres?imgurl=http://www.2carpros.com/forum/automotive_pictures/170934_firing_order_1.jpg&imgrefurl=http://www.2carpros.com/forum/1998-chevy-blazer--spark-plug-wires-vt257725.html&usg=__mEuwyzlUpS9OE3hDhooTkWaPA7s=&h=260&w=278&sz=15&hl=en&start=1&um=1&tbnid=FCT3-hbHWraurM:&tbnh=107&tbnw=114&prev=/images%3Fq%3D1998%2Bchevy%2Bblazer%2Bfiring%2Border%26hl%3Den%26sa%3DN%26um%3D1

change the mass air flow meter

The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

make sure u have the wires in the correct spots, there is a firing order, u need to have them in the right spots or else it wont fire, call ur local parts store and they will give u the firing order

1-2-3-4-5-6 firing order( belt end looking toward trans axle ) first on left (1) (2) on right(3)on left and so on