May be your multi function switch( directional switch),possibly a bad fuse,a LCM (lighting control module,a black box by the gas pedal,or maybe a plug pulled out of the module for some reason.
SOURCE: tail lights not working while drive. brake,blinkers work
i have a crown victoria with brake lights no tail lights could you help me?
SOURCE: 97 crown vic turn signals , emergency flashers and brake lights d
have the multifunction switch checked and the flasher.
SOURCE: '96 ford Crown Victoria....No hazard or brake light no turn sigal
Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
SOURCE: Ford f 350 powerstroke, blinkers or reverse lights
The blinkers have a relay under the dash on the driver side. It sounds like your relay isn't working. As far as the reverse lights, there is a switch inside the steering column. So when you put the truck in reverse, it closes the switch and turns on the reverse lights.
239 views
Usually answered in minutes!
×