1989 Toyota Camry Logo

Related Topics:

A
Anonymous Posted on Oct 24, 2013

Location pcv valve in 1989 toyota Camry 4s - 1989 Toyota Camry

5 Related Answers

Anonymous

  • 199 Answers
  • Posted on Jan 05, 2009

SOURCE: need to locate toyota aurion/camry iac valve

the MAF sensor is between the air filter and throttle body. the idle controll is at the throttle body.  Its located on the throttle body on the left side. Follow the air intake to an intake manifold which sits on top of the throttle body. 

Ad

Jerry Parmanand

  • 449 Answers
  • Posted on Mar 03, 2009

SOURCE: steering wheel hard to turn on my 1989 toyota camry

check power steering pump fluid level and belt.

Anonymous

  • 15935 Answers
  • Posted on Jun 05, 2009

SOURCE: pcv valve location on a 89 camry

There is not a PCV valve on the 4cyl. 6 cyl. is located under hood, center, upper engine area, mounted in rear valve cover Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Anonymous

  • 1861 Answers
  • Posted on Oct 01, 2009

SOURCE: where is the A/C expansion valve located in 94

The expansion valve is located on the AC piping which is in the evaporator box , under the dashboard. The entire evaporator box must be removed to gaiun access to the expansion valve. This is not an 'easy' job.

Anonymous

  • 484 Answers
  • Posted on Oct 26, 2009

SOURCE: 1989 Toyota Camry. No brake lights.

It could be the relay, which is a yellow box located under the carpeting in the trunk on the left side. It is a problem common to your model. Also, check the brake switch's (behind the brake pedal) functionality (12V present with key at ACC or ON and continuity between wires when button engaged).

i hope this helps
-matthew

Testimonial: "Wow! I would have never found the problem without you guys. It was the relay located in the trunk. Thanks!"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the pvc valve located on a 4 cyl. 2015 Toyota 2.5 L Camry

https://www.toyotanation.com/forum/310-camry-7th-generation-2012-2017/1231513-2013-camry-pcv-valve-location.html
2helpful
1answer

Engine runs rough and gets worse when accellerating

PROBLEM TROUBLE AREA
Rough idle, stalls or
hesitate on acceleration :
.Spark plug faulty
. High-tension cords faulty
Ignition problems:
• Ignition coil
• Igniter
• Distributor
. Incorrect ignition timing
Vacuum leaks:
. PCV valve and line.. .
. EGR line..
. Intake manifold.
• Throttle body
• ISC valve
• Brake booster line

• Throttle body
• Brake booster line
. Incorrect idle speed
. Reset timing
. Adjust valve clearance
. Check fuel system . Check air cleaner
. Incorrect valve clearance
. EFI system problems
. Low compression


2helpful
1answer

WHY IS OIL GETTING IN THE AIR INTAKE IN MY 95 TOYOTA CAMRY

See here p147 for a diagram
http://www.turboninjas.com/camry/eg1.pdf

The PCV valve and hose are on the suction (vacuum) side of the throttle, and this is meant to **** oily crankcase vapours into the inlet manifold for burning.
This should be replaced by fresh air from the upstream or atmosphere side of the throttle, the top hose in the diagram.
When the PCV valve and its hose gets blocked, and the engine is a bit worn, Combustion blow by pressure and oil vapour in the crankcase builds up and is not sucked through the PCV valve. Instead it is forced into the intake tract.
So check the PCV valve, hose, and bleed return hose to make sure they are clear OK. If the problem persists, your engine has probably developed worn piston rings, and blow by is now too high to control properly.
0helpful
1answer

Pcv valve 94 v6 xle camry location

I'm not sure exactly where it is but they are always on one of the valve covers. it is shaped like an "L" and will have one vacuum hose connected to it and it inserts into a rubber grommet on the valve cover.
0helpful
1answer

Toyota camry valve

The PCV valve? It's on the valve cover. Will see a vacuum line coming off the valve cover.
3helpful
1answer

Pcv valve location on a 89 camry

There is not a PCV valve on the 4cyl. 6 cyl. is located under hood, center, upper engine area, mounted in rear valve cover Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
0helpful
1answer

1989 toyota corolla rpm goes down than up

First thing to look for would be vacuum leaks. Make sure all your hoses are good and tight, and no cracks. With the engine running, wiggle them around and listen for a hissing. Then check all your intake bolts for tightness. You may have a leaking EGR valve, or a plugged PCV. Make sure your air filter is clean. Try those for a start, and let me know. Good luck.
1helpful
1answer

Location for pcv valve on 2002 Toyota Camry 4cyl

Daeler Mechanic told me there is no PCV valve on my particular model.
0helpful
1answer

Positive crankcase ventilation system

If built like most, the valve cover will have a fitting with a fairly large hose leading away from it.
The PCV valve (Positive Crankcase Ventilation) is found in this line.

This allows fumes forming within the engine oilways sometimes pushed out by minor blowby of the cylinders to be routed back to the air intake so they combust in the engine instead of being vented into the air, something we didn't worry about 50 years ago.
Not finding what you are looking for?

168 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...