Check engine light is on in my 2011 Dodge Nitro. Oil is good. I put coolant in. Dont know what else to check or how to clear it

SOURCE: 2000 dodge caravan engine warning light on

Hi there ... the engine warning light thats on on your dash is probably the check engine light. You'll have to find out the codes and then we can help you with the problem. have iot scanned for codes and let us know what they are. We can help you form there.

SOURCE: dodge nitro ''change oil'' light reset, how???

Turn the key on, engine off, slowly depress the accelerator pedal to the floor three times within ten seconds. Turn the key off. Turn the key on and start the vehicle. If it is still on repeat the process.

SOURCE: 2008 Dodge Avenger: How to get codes when check

Need to use a code reader to read and reset check engine light.

SOURCE: 2008 dodge nitro change oil light how to turn off ...

Directions are in the book, but you would put the key in and turn it all the way, just don't start engine. Pump gas pedal all the way to the floor 3 times slowly, but it has to be with 10 seconds. Turn key off and when you start again, oil changed chime and warning should not be on. If it is, try again.

SOURCE: The engine light on my dodge Nitro is on

its emissions, go to an auto part store and they should have an obd2 reader and it will scan the emissions system and tell you what is wrong. more than likely an o2 sensor. also check the gas cap and make sure its on good that will make it come on too.