SOURCE: I need a fuse diagram for a 2007 dodge caliber!
your best bet is to turn your key on and check all of the fuses with a test light if you have a blown fuse you will have power on one side and nothing on the other side of the fuse ,some fuses will show nothing on either side that might be a spare fuse or a circuit not turned on at the time
SOURCE: belt routing diagram for 2007 caliber w/ 2.4
If you register here: http://www.caliberforumz.com you can download a free copy of the repair manual for your car in the "General discussion" forum. That manual will have the diagram you are looking for.
SOURCE: need instuctions to change tail/break lights on 07 dodge caliber
popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.
To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.
Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.
Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.
Good luck!
SOURCE: 2007 Dodge Caliber R/T dashboard lighting
It may be lose or burned out. Call the local auto-electric shops and ask what they would charge you to replace it
162 views
Usually answered in minutes!
×