2006 Acura RSX Logo
J
Jon Bingel Posted on Oct 18, 2013

High beams dont work

I am wondering why both high beams don't work. I have no issues with low beam/running lights, however neither R/L high beam works. I replaced one today, but no luck. Any help would be greatly appreciated!!

1 Answer

Warner Brooks

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Oct 18, 2013
Warner Brooks
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Oct 18, 2013
Answers
9
Questions
0
Helped
2198
Points
27

There is a relay in the power block/ fuse box under the hood.

5 Related Answers

Anonymous

  • 84 Answers
  • Posted on Oct 18, 2008

SOURCE: 2002 acura tl headlight issue

MAKE SHURE YOUR GROUNDED AND THE BULB IS IN RIGHT SOME BULBS YOU CAN NOT TOUCH WITH YOUR FINGERS BECAUSE OF MISTURE ON SKIN

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 08, 2009

SOURCE: Low Bean Lights Inoperative on 1997 Acura TL

If your car is running daytime running light system .. there is a DTR relay that goes defective and needs replacing ... I had the identical problem that was fixed with this replacement. The DTR relay is behind the glovebox.

Michael Gutwein

  • 104 Answers
  • Posted on Feb 09, 2009

SOURCE: Right headlamp doesn't work on low beam only

in this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Anonymous

  • 1 Answer
  • Posted on Mar 17, 2010

SOURCE: 2002 Acura RSX low beam headlights dont work. All

The same thing happended to my Acura RSX and now they are saying that it is an electrical problem. I put new bulbs and both of them are fused

Anonymous

  • 1 Answer
  • Posted on Feb 15, 2011

SOURCE: 2002 Acura TL low beam headlight

How to Shift my headlight beam from position.
from I replace my headlight it's spatting directly on the ground..What can i do to change it from position

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers
1helpful
1answer

Is there any fuses or relays that are not in the fuse box on a 2002 buick rendezvousfor the bright lights

The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.
0helpful
2answers

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help

Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)
0helpful
1answer

Low beams don't work on 1997 Honda Civic

If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work.
0helpful
1answer
4helpful
2answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...

It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)
1helpful
1answer

My headlights went out dont know what the problem is low beam dont work high beams works

it may be the dimmer switch located on the base of the steering colume that is not working on the low beam side.also the headlights themselves may need changing if the low beam filament is burnt out and you didn`t realize one was burnt out then the other one burnt out.if that`s not the case then it could be a bad connection at the plug connector for the low beam or for some reason power is lost between the switch and the headlight.you don`t say if this has day time running lights,if it does then it could be the drl relay that is bad.
2helpful
1answer

I have a 2005 dodge caravan. the headlights have

On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.
0helpful
1answer

HIGH BEAM DONT WORK BUT LOW BEAMS DO I HAVE A MONTE CARLO 07 AND I AM WONDERING IF ANYONE HAS THE PROBLEM WHERE THE RUNNING LIGHT WORK BUT THE HIGH BEAMS DONT. iT WORKED FINE THIS MORNING AND WORKS FINE IF...

hiya, it sounds like a problem with either the stalk for the lights high beam or the relay isnt latching properly. id start with the relay as some relays on cars are interchangable. swap one over for another that is the same then try it. if this doesnt work try a new stalk. hope i helped :0)
1helpful
1answer

Low beam not work !!

replace the headlight bulbs. Usually when the bulbs blow out the low beam blows out first, but the high beams still work. If you want and need both low and high beams to work then replace the headlight bulbs with brand new ones and I garauntee that both low and high beams will work
Not finding what you are looking for?

707 views

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...