I use crazy glue and some patient and work fine. Put a little on the other side of the broken key, push back into ignition and hold for a couple of minutes until dry, when removing pull fast, if fail try again. I have a Sprinter and the keys are prone to breaking already happen twice and both time I got it out with crazy glue.
SOURCE: Want to remove the ignition lock cylinder since a broken key is stuck inside.
get a phillipshead un do about 4 screws from underneath plastic cover which hides steering colume. remove cover you will see white plug on the left hand side of ignition barrel disconect.then right hand side there will be acable disconect.now get a small chissel and anti clockwise tap bolts which have no heads on them that are on top of steering colume when they are alittle bit lose use plyers its easier pull bolts out clamp will then come of and then you can pull whole ignition of. now there is 2 brass pins which hold barrel in ignition up near the key end remove and barrel will come out but it might be easier to take whole ignition to locksmith and get them to do it and get new key for around 30 bucks i did a mates about couple months ago seeya orangepeel.
SOURCE: 2000 Kia Sportage Ignition Switch Removal
radio will not shut off when pull the key out of a 2000 kia sportage
SOURCE: replacing the belts for a nissan 1995 200sx
http://www.2carpros.com/car_repair_information/year/1997/make/nissan/model/200sx/1997_nissan_200sx_drive_belt_routing_diagram.htm
205 views
Usually answered in minutes!
×