SOURCE: high beams dont work
Could be that your high beam light's are burnt out and need to be replaced. When you say the the switch is new you mean the lever on the stearing collum is new right?? Good luck
SOURCE: High beam headlights quit working. Bulbs are OK.
When you checked the bulb plug and got 12 volts, did you meter ground some where else on the car? If so, you might check ground also at the plug.
SOURCE: low beam headlight are not working. high beams and
The problem could be the headlamp switch.
You are right about the fuses.There is one for the LH high/low and one for the RH high/low.
Have you tried turning on the lamps manually with the switch?
SOURCE: i replaced the headlight bulb because the high
There should be separate relays for the low and high beams. located in the fuse box, probably under the hood. they look like plug-in small rectangular black boxes.
SOURCE: low beam not working but high beam is-Pontiac Vibe 2005
I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.
I have the same problem. I am trying to buy a new module.
317 views
Usually answered in minutes!
×