Torque specs for a 99 2.4 turbo volvo head replacement

https://www.google.com/search?q=Fiat+Uno+1.4+cylinder+head+torque+specs

..

26 lb ft and aditional 180 degees the secuence is from the center go on circles to the out side

need more info of the car, engin sice and is it petrol or diesel

OLD POST.( M15a torque settings)outside canada
we dont have any m15a here in usa,sorry
but my cousin does (in SA)
so found it.
I TRIED TO FIND A PDF FOR YOU.
using google "m15a pdf" hits.
2004 FSM real.
http://ssoc.co.uk/forums/showthread.php?1835-Workshop-Manuals

FIRST GOOGLE HIT. LINKS TO THERE
THAT LINKS TO AND IS HERE.
the book.
http://www.mediafire.com/download/cywbm9kgvii/Suzuki+Swift+Workshop+Manual.pdf

40MB PDF , LARGES
I DID ALL THIS, CUZ, ME CoUSIN FRED ASKED ME TO
FIND THIS BOOK for him,SO TOok efforts.

AND IS ANGLE SET.

First off you need new bolts as they are one time use stretch to yield bolts.
Step 1 - 20nm , step 2 - 60nm then 130 degrees of bolt head rotation*.

Please specify year and model of the car... I have a 1990 740 and can help you with this... I did this work for mine and the torque specs where 75 pounds. You can find more information in here: http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

you have torque cylinder head bolts in 3 steps first torque bolts 14 ft lbs then second torque all bolts to 43 ft lbs step three torque all cylinder bolts to plus 90 degrees.

The head torquing sequence for any cylinder head is as below, continue the pattern if there are more than 10 bolts:-


10 6 1 3 7

8 4 2 5 9

Start at the middle two bolts and do your sequence at least three times, first at about half the torque, then the full torque value at least twice. It is good practice to re torque the head again after about 1000 km (600 miles), but this is often disregarded due to the problems of getting to the head bolts.

HEAD TORQUE SPEC IS 37 FT LBS ROTATE AN ADDITIONAL 90 DEGREES 1/4 TURN.

you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you have