check your fuses first. You may have blown one.
Visual Inspection Chart
Mechanical
Electrical
- Integrated control panel (ICP) physically damaged, misaligned, any control(s) inoperative
- Digital audio compact disc player physically damaged, misaligned, any control(s) inoperative
- Antenna or antenna cable physically damaged, misaligned connection(s)
- Radio speakers, mounting/speaker cones physically damaged, misaligned
- Radio ignition interference capacitors, radio frequency interference suppression bond misaligned (also check for cleanliness and metal-to-metal contact)
- Battery junction box (BJB) fuses F127 (5A), F117 (20A), F127 (5A).
- Central junction box (CJB) fuse F227 (10A) F211 (15A), F216 (15A), F226 (10A) (wagon only)
- If the fault is not visually evident, proceed to diagnose the integrated control panel (ICP) by entering the ICP Self-Diagnostic Mode.
ICP Self-Diagnostic Mode
NOTE: To enter the ICP Self-Diagnostic Mode, the ICP must be ON and in radio tuner mode (AM/FM).
- Enter the diagnostic mode by pressing and holding preset buttons 3 and 6 simultaneously. This will suspend all radio functions, and display SP.
- Preset Button 1 = Audio internal/external SELF TEST. The display will flash SELF while gathering the diagnostic trouble codes (DTCs), then stop flashing when complete. Press the TUNE UP button to display the DTCs if any exist. Record codes and refer to the following table:
ICP SELF-TEST CODES
Code
Description
0
No diagnostic trouble codes logged
1
No response from rear chassis unit (RCU)
2
No response from cassette player
3
-
4
No response from compact disc player
5
-
6
-
7
No response from remote climate control
8
-
9
Read Only Memory Verification failed
- Preset Button 2 = Displays the feature strap for code identification, refer to the following table.
Code
Description
01
Base-Electronic Search Radio (ESR) with Manual Climate Control (MCC)
07
Electronic Search Radio with Cassette (ESC) with MCC
17
ESC with Electronic Automatic Temperature Control (EATC)
97
Not programmed default of ESC with EATC
- Preset Button 3 = ICP and RCU identification. This test identifies the software level of the ICP and RCU. The ICP is tested first, followed by the RCU. The display will have two sequences of three codes each. The first sequence is for the ICP, the second sequence is for the RCU. For code identification, refer to the following table:
Item
Part Number
Description
1
-
Product variant code
2
-
Tape model
3
-
CDR
SOFTWARE IDENTIFICATION CODES
Product Type Code
Description
Product Variant Code
Description
21
ICP
07
08
09
10
11
12
EATC with AM/FM, cassette player and CD changer
EATC with AM/FM and cassette player
Manual A/C with AM/FM and cassette player
Manual A/C with AM/FM
EATC with AM/FM and cassette player
EATC with AM/FM cassette player and CD changer
31
RCU
01
02
03
Analog
Digital
Midline
71
Remote climate control
01
LH drive
52
Compact disc/disc jockey
01
02
03
04
Sony® 10 disc
Sony® 6 disc
Clarion® 6 disc
FMS 6 disc
i have same problem
×