My shifter dropped down and I cant figure out what happend. It still shifts, but I have to pull up on the shifter to change gear. I cant find what holds the shifter in place as I dont have a manual.

Easy fix
I had the same thing. Under the car where the shifter goes through the floor is a plate that the shifter is attached to. Only ONE screw holds this in place. You need to put on a lift to fix.
reach up and in to replace the screw. I added two more to be sure

This is a common Problem

The shifter bushings are broken, requires (4). You will have to take the console out to see what needs done. You can fix it without them if you are a little mechanical. You will see when you get the console out. Here is a good source for the parts: http://www.midcomustang.com/

Here is a good online manual in pdf format: http://www.techcapri.com/Repair/Capri_Service_Manual.htm

If you don't feel confident enough to tackle this, any good shop could do this job within a few hours time.

Your shifter stabilizer Bar Assembly needs to be replaced ( http://shop.moderncapriparts.biz/catalog/ProductDisplay.cfm?id=14061&cid=148 ). There are small plastic clips in the square shaped end of the bar. Unfortunately, they can not be independently replaced. The best place to find this and all 1991-94 Capri parts is Modern Capri Parts. Go to: http://www.ModernCapriParts.Biz