Code p0011 - Mercedes-Benz Cars & Trucks

https://www.google.com/search?q=Nissan+P0011


P0011 Nissan See the error code p0011. it indicates the engine control module has determined that the bank 1 intake camshaft is more advanced than what the engine control module has commanded it to be. Jul 23, 2021

How to Fix NISSAN P0011 Engine Code in 4 Minutes [1 DIY ...

This code is generic and does not specify a specific failure. This code could represent low oil level, overdue oil change, restricted or damaged VVT solenoid. Emissions can be affected by a damaged PCV valve, ignition component or a vacuum leak. Would you tell me what you have checked or found so far? How is the engine running (smooth or rough)? Does the Engine Light only turn on solid or does it flash? Let me know how things are going or if there is anything else I can do. Good luck.

Thread Fault Code P0011 http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CDMQrAIwAA&url=http%3A%2F%2Fforums.bimmerforums.com%2Fforum%2Fshowthread.php%3F1753679-Fault-Code-P0011&ei=2ixhU9CbHM6_sQTE64HwAw&usg=AFQjCNHfNHnXBsNvMl3mH-7xGYDtR-ghIw&sig2=TYMTHX8buY5i2eyC5G_w6A&bvm=bv.65636070,d.cWc

Hopefully these inks will work, and will give you info on the P0011 code. You may want to do a search on the web "BMW code p0011" for more info...

The P0011 means "A" Camshaft Position - Timing Over-Advanced or System Performance.
__________________
mini vci for tis

code P0011 intake camshaft position performance ( could be a camshaft sensor, or could be that the intake camshaft variable timing unit is stuck try changing the oil and filter and add some seafome to the oil clear the code and drive it and see if the code comes back)

code C0561 system disabled information stored ( the electronic brake control module disables the traction control system when their is a DTC stored that might effect the traction control system, could be caused by the P0011 )

Trouble Code: P0011

-A- Camshaft Position Timing Over-Advanced

P0011 "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
A P0011 DTC trouble code may be caused by one or more of the following:

• Incorrect camshaft timing
• Wiring problems (harness/wiring) in intake timing control valve control solenoid system
• Continuous oil flow to VCT piston chamber
• Failed timing valve control solenoid (stuck open)

P0011 - "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

What does that mean?
A code P0011 refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The "A" camshaft is either the intake, left, or front camshaft.

Potential Symptoms:
Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes:
A P0011 DTC trouble code may be caused by one or more of the following:
* Incorrect camshaft timing
* Wiring problems (harness/wiring) in intake timing control valve control solenoid system
* Continuous oil flow to VCT piston chamber
* Failed timing valve control solenoid (stuck open)

Possible Solutions:
This DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Other related DTCs: P0010 - P0011 - P0012 - P0020 - P0021 - P0022

Hope helps (remember rated this).

P0011 - Intake camshaft position timing ( over advance bank 1 )
O0420 - catalyst system efficiency below threshold bank 1. Hope this was helpful.

This is the trouble code definition....gives you a starting point!

P0011....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)