Abs trouble code 5-8 on 1992 honda accord ex what does left hand rear wheel lock mean?

To clear the Permanent DTC using a dedicated monitor cycle, start by repairing the fault that caused the DTC in the first place. Then clear all the codes except for the permanent DTC (if it were that easy, there'd be no problems), and make sure the Permanent DTC is the only one left.

How to temporally disable abs on a Honda accord - YouTube

? 2:17
https://www.youtube.com/watch?v=WIJbbxuLqmw
Nov 16, 2011 - Uploaded by Austin Sera
Just a quick, easy and clean way to disable abs temporarily. Works on all late 80's to mid ... How to temporally disable abs on a Honda accord. Austin Sera. SubscribeSubscribedUnsubscribe9292. Loading. ... With abs i can be braking hard with my left wheels while the right wheels are on ice. . Read more ...

1993 Honda Accord EX ABS Delete - YouTube

? 2:46
https://www.youtube.com/watch?v=UhAOLiY4tFk
May 10, 2013 - Uploaded by StraightSuccess
This video shows how to run new hard lines when deleting theABS while using a 40/40 pro portioning valve ...

Lessons from a Car Expert : How to Disable an ABS System ...

? 2:00
https://www.youtube.com/watch?v=_qrZlqJiXGA
Feb 21, 2012 - Uploaded by ehowauto
If you need to disable the ABS, or "anti lock brake system", on your car you should do so with caution ...

? about HOW-TO-REMOVE ABS system!! - Honda-Tech

honda-tech.com/honda-accord.../about-how-remove-abs-system-265643...

Well the reason i wanted to do this is because my ABS is junk and i want my bay to ... goto a salvage yard, find any 90-97 accord or integra without ABS....best bet is ... Del Hon-duh, Honda Civic / Del Sol (1992 - 2000), 6, 01-12-2015 02:38 PM.

ABS Removal - HondaShowOff.com Forums

ABS front right wheel sensor not sending , may need new sensor or wire may be snagged .

you bleed the brakes the same as non abs brakes starting with wheel furthest away from brake resavore right rear then left rear then front right then left front , right and left are determined from siting in drivers seat.

I think you pulled the code incorrectly, or are reading it wrong. To get code:
1. Jump pins 4 & 9 on OD2 connector.
2. Turn key 2 clicks.
3. ABS light should blink to give you code. (long blinks for first digit, short ones for second. Example: One long blink and three short blinks would be 13).
Honda ABS trouble codes list :
11= Right front wheel sensor (open/short to body ground/short to power)
12= Faulty right front wheel sensor pulse signal
13= Left front wheel sensor (open/short to body ground/short to power)
14= Faulty left front wheel sensor pulse signal
15= Right rear wheel sensor (open/short to body ground/short to power)
16= Faulty right rear wheel sensor pulse signal
17= Left rear wheel sensor (open/short to body ground/short to power)
18= Faulty left rear wheel sensor pulse signal
21= Continous Operation (chipped pulser)
31-38 are all the same: "solenoid"
51= Motor lock
52= Motor stuck off
53= Motor stuck on
54= Main realy stuck off
61= Ignition voltage
81= CPU (central processing unit)

the abs and brakes are related, but not brakes are not dependent on abs. you mentioned you got new brake pads and the brake pedal got fixed? if it didnt get fixed, then your master cylinder might be going out, its the only logical thing if you bled your brake pads. about the abs, it stands for anti-lock braking system. what it does is at instant high speed stops, it pumps your brakes very fast to stop your wheels from locking up, which prevents your car from skidding, and allows you to manouver your steering wheel as you are braking. very helpful, but not essential. it is like passanger or even drivers airbags, definately better to have, but not essential. if you dont have money to fix your abs right now, dont worry about it, as at least half the cars on the road, including newer, basic cars are not equiped with abs. another thing, abs is a relative new technology, which became common in the 1990s, which means before that, cars didnt have abs, so if someone says to fix it right away because it is 100 percent dangerous, they are just exagerating. just take a little extra precaution while braking, thats all. on the other hand, if you do have the money to fix the abs, you can start by retrieving the code first using a paper clip:

http://www.cb7tuner.com/vbb/showthread.php?t=21259

this will lead you in the right direction. hope this helps, and if you need any help, leave a comment and ill gladly respond. goodluck

PUT KEY IN AND TAP TOP OF KEY WITH RUBBER MALET AND TURN WHEEL AT SAME TIME

ABS control unit recognizes system related problems and causes ABS warning light to come on and stay on under any of following conditions:

• ABS pump runs longer than 2 minutes.
• Vehicle is driven with parking brake on longer than 30 seconds.
• One rear wheel is locked.
• Wheel speed sensor does not transmit a signal.
• Vehicle is driven on extremely rough road.
• Low battery voltage.
• Operation time of solenoid valves exceeds a specified value and control unit indicates an open circuit in solenoid circuit.
• Output signals from control unit are not transmitted to solenoid valves.
• Temporary loss of traction due to excessive cornering speed or starting from stuck condition (mud, snow or sand).

It won't make any difference, seeing that the car is older and you don't have the ABS functionable it won't change anything. You already have the ABS light on so nothing new will happen.
Regards
Sam

Hi,

Most Honda ABS warning light will blink in 2 parts, main system and then sub system to form the code pair. As an example is 3 blinks then 3 blinks is a code 3-5. Once determined, reference below listing.
1 - ABS pump motor over-run
1 2 ABS pump motor
1 3 high pressure leakage
1 4 pressure switch
1 8 high pressure system
2 1 parking brake
3 1 pulser RF
3 2 pulser LF
3 4 pulser RR
3 8 pulser LR
3 12 different diameter tires
4 1 wheel sensor RF
4 2 wheel sensor LF
4 4 wheel sensor RR
4 8 wheel sensor LR
5 - rear wheel lock - R/L
5 4 rear wheel lock - R
5 8 rear wheel lock - L
6 - fail-safe relay - F/R
6 1 fail-safe relay - F
6 4 fail-safe relay - R
7 1 solenoid - RF
7 2 solenoid - LF
7 4 solenoid - R
8 1 ABS function
8 2 CPU comparison
8 4 IC self-check

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.