Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Sep 23, 2013

Park brake wont disengage - 1998 Chevrolet C/K 3500

1 Answer

Corey Hoff

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jan 26, 2022
Corey Hoff
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 26, 2022
Answers
1
Questions
0
Helped
52
Points
3

Got a 1997 Silverado 7.4 vortec had the same problem couple of the terminals on the crank sensor wires were loose ended up burning out the brain lol the ECM and the crank sensor connection terminals is where I would start

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i override the parking brake on a 1993 F700

To override the parking brake on a 1993 F700, you will need to disengage the brake manually. Here are the steps to follow:
  1. Locate the parking brake lever inside the cab of the vehicle. It is typically located near the driver's seat, on the floor or the dashboard.
  2. Pull the parking brake lever up to the fully engaged position. This will disengage the brake and allow you to move the vehicle.
  3. Start the engine and shift the vehicle into gear.
  4. Slowly release the parking brake lever, allowing the brake to engage gradually. Do not release the lever too quickly, as this can cause the vehicle to lurch or jerk.
  5. Slowly drive the vehicle, testing the brakes to make sure they are working properly. If you experience any problems or issues with the brakes, you may need to have them checked or repaired by a qualified mechanic.
Overall, to override the parking brake on a 1993 F700, you will need to disengage the brake manually by pulling up on the parking brake lever and releasing it gradually. Make sure to test the brakes before driving the vehicle to ensure they are functioning properly.
1helpful
1answer

2015 Mitsubishi Mirage. Parking brake will not disengage. What can I do so I can move car?

There is help here and things to check

Mitsubishi Mirage G4 Parking brake won't release Inspection ...

https://www.yourmechanic.com > ... > Mirage G4
Mitsubishi Mirage G4 Parking brake won't release Inspection costs between $80 and $90 on average. The parts and labor required for this service are ... Missing: 2015 ‎' Must include: 2015

How to Troubleshoot a Parking Brake That Won't Release ...

https://www.autoblog.com > 2016/12/13 > how-to-trou...
Dec. 13, 2016 - If the parking brakes won't release, then you need to check the following: Corroded or rusty parking brake cable. Damaged or missing return spring. Rear caliper pivot arm has seized. general advice and videos.

https://www.google.com/search?q=2015+Mitsubishi+Mirage.+Parking+brake+will+not+disengage
0helpful
1answer

Park brake keeps flashing and beeps

Usually this means one of two things. Your parking brake is still applied and your shifter is not in park...or, your parking brake is not fully retracted and not touching it's fully retracted limit switch. Cycle your parking brake several times with the vehicle off. When you release it let it disengage fully. Start the vehicle and put it in gear but don't travel (foot on regular brake). If your parking brake is fully disengaged then your dash light for the parking brake should be extinguished. If you STILL have this problem then your limit switch needs to be adjusted or replaced.
0helpful
1answer

1500 parking brakes wont disengage

This may sound like a silly answer, but, how often did you use your parking brake previously?
Parking brake cables tend to rust inside the sheath if they are not used very often.
When you apply the parking brake, you use a fair amount of physical force to engage the park brake.
If you do not use your parking brake very often, the inside of the cable may be rusted enough that when you release the park brake, the cable will not release (cable will not slide inside the sheath), as there is only the pressure of the brake shoe return springs disengage the park brake.
0helpful
1answer

I have a exclamation mark showing on my dash what does this mean? When I purchased the car I did not get the book with it.

You have a Canadian model car. The exclamation mark in a circle in parentheses is the parking brake indicator. Make sure your parking brake is FULLY disengaged. If you have been driving without fully disengaging the parking brake, you may have damaged your rear brakes and/or rotors.

If the parking brake is fully disengaged, you may have a faulty switch at the brake handle.
0helpful
1answer

Shifter wont disengage from park-replaced park brake switch,but no help

you need to check to make sure the brake lights work, also the brake light switch is the switch not prake-brake switch, the switch is located above the brake pedal no the bracket that holds the pedal.first thing is to check all your fuses.
1helpful
1answer

Wont disengage from park you push the release button and press the brake and wont come out of park

check and see if the brake light switch is not faulty,could cause that problem
0helpful
1answer

My 2006 highlander vsc lights and abs lights stay and the shifter wont disengage out of park

Look for a blown Brake Lamp fuse, or a faulty brake lamp switch, which is located above the brake pedal.
0helpful
1answer

Wont shift outta park.

Make sure that your brake lamps are working. I have seen the brake switch go bad and cause it not to come out of park. Good luck.
0helpful
1answer

2000 Land Cruiser Parking Brake alarm will not turn off.

check the parking brake switch if it is engaging and disengaging when you pull the the parking brake.
Not finding what you are looking for?

62 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...