Question about 1996 Saturn SL

1 Answer

Need head bolt torque specs for a 1996 saturn sl

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 18 Answers

Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Posted on Sep 19, 2013

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 185 Answers

SOURCE: my 96 sl 1.9 dohc valve cover gacket

The only thing would do for the stripped bolts is to retap them with a tap & die set using the next larger size. As for the one that's broken off you can use what's called an "Easyout". You drill a hole into the broken off part of the bolt and then insert the Easyout. The Easyout has left hand threads and as you turn it , it bites into the broken bolt and usually will take it right out.

Hope this helps.

Good luck Loringh

Posted on Oct 17, 2008

Anonymous

  • 2 Answers

SOURCE: need location of thermostat in 98 saturn sl series

Front of the motor, low, in the fitting where the radiator hose goes into the motor; not the one on the drivers side. The fitting is rounded and is held on with two bolts.

Posted on Dec 05, 2008

Anonymous

  • 1 Answer

SOURCE: 2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT

just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation

Posted on Dec 28, 2008

Anonymous

  • 47 Answers

SOURCE: 1997 Saturn SL-2 DOHC cracked head?

not really your head holds alot of pressure any temp. fix will just break

Posted on Sep 26, 2009

Lyle D. Rowh

  • 743 Answers

SOURCE: I have a 1996 saturn

Ther are 4 blots on the bottom of the timing chain cover, oil pan...this qould hold it on.

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the head bolt torque spec on a 94 Saturn sc1 with an 1.9 engine


You will need a torque angle gague to properly torque these bolts. The torque for a SOHC engine is 22lb in correct sequence on the first pass and 37lb in correct sequence on the second pass. You need then install a torque angle gague and in sequence go 90 degrees

May 18, 2015 | Saturn SC1 Cars & Trucks

2 Answers

Torque specs.for head on a 2000 1.9 saturn


there are 2 different 1.9 engines, so for future ref, you need the 8th digit of the VIN number. use NEW bolts. torque to 22 ft lbs. then turn 90 degrees, then another 90 degrees.

Aug 04, 2011 | Saturn SC2 Cars & Trucks

1 Answer

1996 Saturn SL 1. Does the crankshaft pulley bolt requeire sealer?


According to a book, I don't know, but my rule of thumb is to put red loctite (Loctite 277) on all bolts for flywheel or anything ataching to the crank that I don't want comming off. Then again I work on diesel applications so my rule of thumb for auto could be off base. One thing though, when using loctite you take the dry torque spec of the bolt and multiply by 75% or 0.75 and that is your new torque spec. also anything touching a crankshaft or camshaft i would sugest using new bolt and or nuts.

Jul 24, 2011 | 1996 Saturn SW

2 Answers

Need the torque settings for a '94 cutlass supreme sl 3.1 in reference to the cylinder heads I need the sequence and the torque if possible a diagram


Heres the diagram and specs for the cylinder head and also i have enclosed the torque specs for the intake and its tightening sequence, good luck and hope this is helpful, have a good day.
Cylinder head bolts. Step 1) tighten to 44 ftlbs.
Step 2) tighten an additional 95 degrees.

Lower intake bolts. Step 1) all bolts are tightened to 115 inch lbs.


Upper intake bolts.Step 1) all bolts tighten to 18 ft,lbs no diagram, start in the middle and work your way out going cris cross.johnjohn2_88.gifjohnjohn2_89.gif

Mar 19, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

Looking for head bolt torque for 95 SOC saturn. im having valve guides replaced


The torque spec are as follows, step one is 22 ftlbs then step 2 is 33ftlbs and the third step is to tighten bolts 90degrees more also the bolt tightening sequence is here, this is a diagram of the bolts good luck and i hope this helps.johnjohn2_60.gif

Jan 10, 2011 | 1995 Saturn Sl

1 Answer

Engine torque specs for 1996 chevy cavalier 2.2l


For 1996 Chevrolet Cavalier 2.2L SFI OHV 4cyl the check the next Head Bolt Torque sequence...

------------ front | 8 4 1 5 9 | of | | engine | 7 3 2 6 10 | ------------

Step 1: torque long bolts 8,4,1,5, & 9 to 46 Ft/Lbs torque short bolts 7,3,2,6, & 10 to 43 Ft/Lbs
Step 2: torque all bolts an additional 90 degrees Recheck final torque in sequence

*** CAUTION *** engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.

Hope helps (remnember rated this).

Jul 15, 2010 | 1996 Chevrolet Cavalier

1 Answer

Need how to repair head gasget 1993 saturn 1.9li


head gasket repair requires stripping the entire motor down to the block, and replacing every gasket in your way down, as well as the head bolts (torque-to-yield).

the way the saturn timing components are ran i would not suggest this unless you are heavily mechanically inclined. theres alot of tedious tear down as well as torqueing to spec on the build back up.

if you have the time, patients and know how to do it i would say go ahead, but if you are hesitant i would get someone else to do it.

to finally answer ur question any hanes or mitchell repair manual will tell you how to dissasemble and reassamble your engine step by step.

Jan 21, 2010 | 1993 Saturn SL

1 Answer

Need to find specks on cylingder head for 1996 toyota tercel


The cylinder head bolt torque is a 2 step process.

First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.

Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...

Starting at the center bolts, retorque all ten bolts an additional 90 degrees.

Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.

Jan 21, 2009 | 1996 Toyota Tercel

3 Answers

Head bolt torque for a 1996 ford ranger 2.3liter


The torque specs and tightening sequence can be found in Haynes repair manual #36071.Ford Ranger 1993-2005

Jun 26, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Saturn SL Logo

2,342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...