SOURCE: serpentine belt replacement
There should be a factory diagram on the top of the original radiator shroud. This will show the belt routing. The easiest way to change the belt is to use a 5/8 socket on the pulley bolt on the tension wheel, attach a breaker bar or ratchet, stand on the passenger side and pull the handle to you. If you need more leverage, I like to put a large box end wrench on the handle, it works and is easier to find than a small cheater pipe. You can easily lever the tension pulley up to release the belt tension. You will need an extra pair of hands to pull the old belt out and place the new belt, following the routing guide.
SOURCE: serpentine belt replacement 1994 chevt silverado 5.7 lt
call your local autozone and the will tell you over the phone or fax you a copy
SOURCE: i need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala
Diagram 9-5 on this page:
http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf
SOURCE: need a serpentine belt routing diagram for 2001
it doesn't show you under the hood near the hood latch ,newer vehicle it should. check this first.
2,081 views
Usually answered in minutes!
×