2000 Chrysler Concorde Logo
Posted on Apr 17, 2009

2000 chrysler concorde switch unlocks but wont lock doors.

I have a 2000 chrysler concorde 2.7l v6, with power windows and doors. I'm having problems with both drivers and passenger side door locks, When I push the switch it unlocks the doors but wont lock the doors. I've checked the wiring harness to the lock switch it's connected, and I've checked the fuse it's also good. Any help would appreciated. Thanks.

  • Anonymous May 11, 2010

    Do'es this happend with both driver's side switch and passenger's side switch or just the driver's side main lockout switch?

  • Mike Butler
    Mike Butler May 11, 2010

    Do you at least hear it trying? Soft"thump" noise from door lock area?

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Apr 28, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 28, 2009
Answers
1
Questions
0
Helped
562
Points
2

Sounds like the actuator. I had the same problem. Mine got to the point where it will now only work with the key. Had it looked at by dealer.. actuator is bad. Good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How can I disconnect the automatic door locking at 17 mph on my 2000 Chrysler Concorde

there are two way of doing these . frist you can remove door panel on drive side and find the power wire for door locks rand remove from connter or cut . sec. you can take to dealer and they can plug in to car and change that way . but only deal can do that .
0helpful
1answer

How do you reset the anti-theft system on a 2000 chrysler concord

Put the key into either door lock or the trunk cylinder and turn the key to the fully unlock position and remove. This should turn off the alarm system. I don't know the methods can do for you or not, but you can have a try.

________________________
CARPROG FULL V4.01
0helpful
1answer

Help alarm on my Chrysler Concorde 1995

This should work if it is a factory alarm, first roll the window down on the drivers side door then manually lock and shut the door, then unlock the door with the key and see if that shuts it off!
2helpful
1answer

My 2000 chrysler cirrus driver side window wont role down. does it require a fuze or a mechanic?

if was fuse no window would move- check to see if drivers door has a window lock switch first - if not-
have a mechanic see if power at motor and go from there
0helpful
1answer
4helpful
1answer

My 2002 chrysler concorde door handle has lost all tension and will not open the door from the inside. any advice??

My concorde 2003, both right side locks wont open from inside. The front one has broken handle and the rear one is without any tension.
0helpful
1answer

Passenger side front door will not unlock. Door

probably a solenoid thats not opening or closing. you can get one from a junk yard. its located inside the door. if you cant install it, have a shop you trust do the work.
0helpful
1answer

I have a 2000 chrysler concorde with possible

I would say thats for you to decide. You got to weight all your options, whats the1300.00 for replacement engine? Or what, if it was up to me i would most likely get a nother car but thats me, you got to do whats best for you and your situation.
0helpful
1answer

My 1999 concord wont start

lock and unlock door twice
Not finding what you are looking for?

572 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...