-
Master
594 Answers
- Posted on Apr 17, 2009
Re: replace water pump 93 grand prix
Here is a step by step instruction on how to replace your water pump. please do not forget to rate and comment about your experience today with fixya.
-
Disconnect the negative battery cable.
-
Remove the air cleaner assembly.
-
If necessary for access, remove the coolant recovery reservoir.
-
Partially drain the coolant, into a suitable container, to a level below the water pump.
-
If equipped, remove the serpentine belt guard/cover.
-
Remove the serpentine belt.
-
Remove the retaining bolts, then remove the water pump pulley.
-
Unfasten the 5 water pump attaching bolts, then remove the water pump and gasket. Discard the gasket.
To install:
-
Thoroughly clean the water pump mounting surfaces.
-
Position a new gasket, then install the water pump.
-
Install the attaching bolts and tighten them to 89 inch lbs. (10 Nm).
-
Install the water pump pulley.
-
Install the serpentine belt and belt cover/guard (if equipped).
-
Refill the cooling system with the specified type and amount amount of engine coolant.
-
Install the air cleaner assembly.
-
Connect the negative battery cable, then start the engine and check for coolant leaks.
×